BH30FB1WG-TR ROHM

CMOS LDO Regulator Series for Portable Equipments Standard CMOS LDO Regulators BH FB1WG series, BH FB1WHFV series, BH LB1WG series, BH LB1WHFV series Large Current 300mA CMOS LDO Regulators BH MA3WHFV Series No.10020ECT02 Description The BH FB1W, BH LB1W and BH MA3W series are low dropout CMOS regulators with 150 mA and 300 mA output that have 1% high accuracy output voltage. The BH FB1W series combines 40A low current consumption and a 70 dB high ripple rejection ratio by utilizing output level CMOS technology. The components can be easily mounted into the small standard SSOP5 and the ultra-small HVSOF5/HVSOF6 packages. Features 1) High accuracy output voltage: 1% 2) High ripple rejection ratio: 70 dB (BH FB1WHFV/WG, BH LB1WHFV/WG) 3) Low dropout voltage: 60 mV (when current is 100 mA) (BH MA3WHFV) 4) Stable with ceramic output capacitors 5) Low Bias current : 40A (IO = 50 mA) (BH FB1WHFV/WG) 6) Output voltage ON/OFF control 7) Built-in over-current protection and thermal shutdown circuits 8) Ultra-small power package: HVSOF5 (BH FB1WHFV, BH LB1WHFV) 9) Ultra-small power package: HVSOF6 (BH MA3WHFV) Applications Battery-driven portable devices and etc. Line up 150mA BH FB1W and BH LB1W Series Part Number 1.5 1.8 1.85 2.5 2.8 2.9 3.0 3.1 3.3 Package BH FB1WG - - - SSOP5 BH FB1WHFV - - - HVSOF5 BH LB1WG - - - - - - - SSOP5 BH LB1WHFV - - - - - - HVSOF5 300mA BH MA3WHFV series Part Number 1.5 1.8 2.5 2.8 2.9 3.0 3.1 3.3 Package HVSOF6 BH MA3WHFV Part Number: B H F B 1 W , B H L B 1 W Part Number: B H M A 3 W ab ab ab Symbol Details Symbol Details Output Voltage Designation Output Voltage Designation Output Voltage (V) Output Voltage (V) Output Voltage (V) Output Voltage (V) 15 1.5V (Typ.) 2.9V (Typ.) 15 1.5V (Typ.) 2.9V (Typ.) 29 29 a 18 1.8V (Typ.) 3.0V (Typ.) a 18 1.8V (Typ.) 3.0V (Typ.) 30 30 1J 1.85V (Typ.) 3.1V (Typ.) 25 2.5V (Typ.) 3.1V (Typ.) 31 31 25 2.5V (Typ.) 3.3V (Typ.) 28 2.8V (Typ.) 3.3V (Typ.) 33 33 28 2.8V (Typ.) b Package: HFV : HVSOF6 b Package: G : SSOP5 HFV : HVSOF5 www.rohm.com 1/8 2010.07 - Rev. C 2010 ROHM Co., Ltd. All rights reserved. BH FB1WG series, BH FB1WHFV series, Technical Note BH LB1WG series, BH LB1WHFV series, BH MA3WHFV series Absolute maximum ratings (Ta = 25 C) Parameter Symbol Limits Unit VMAX -0.3 ~ +6.5 V Applied supply voltage 680 (HVSOF6) Power dissipation Pd 410 (HVSOF5) mW 540 (SSOP5) Topr -40 ~ +85 C Operating temperature range Tstg -55 ~ + C Storage temperature range 125 Recommended operating range Parameter Symbol Min. Typ. Max. Unit Power supply voltage VIN 2.5 - 5.5 V BH MA3W -- 300 mA Output current BH FB1W IOUT -- 150 mA BH LB1W -- 150 mA Recommended operating conditions Parameter Symbol Min. Typ. Max. Unit Conditions Input capacitor CIN 0.1 - - F Ceramic capacitor recommended Co 1.0 - - F Output capacitor Ceramic capacitor recommended Noise decrease capacitor Cn - 0.01 0.22 F Ceramic capacitor recommended BH FB1WHFV/WG , BH LB1WHFV/WG Parameter Symbol Min. Typ. Max. Unit Conditions 1 IOUT=1mA Output voltage VOUT VOUT 0.99 VOUT VOUT 1.01 V I GND 40 70 A IOUT=50mA Circuit current - STBY=0V Circuit current(STBY) I STBY - - 1.0 A RR - 70 - dB VRR=-20dBv, fRR=1kHz, IOUT=10mA Ripple rejection ratio IOUT=1mA to 30mA Load response 1 LTV1 - 50 - mV Load response 2 LTV2 - 50 - mV IOUT=30mA to 1mA 3 VIN=0.98 VOUT, IOUT=100mA Dropout voltage VSAT - 250 450 mV 4 Line regulation VDL1 - 2 20 mV VIN=V +0.5V to 5.5V OUT IOUT=1mA to 100mA Load regulation (1) VDL01 - 10 30 mV IOUT=1mA to 150mA VDL02 - 15 90 mA Load regulation (2) 3 3 3 150 250 420 Over current protection ILMAX mA Vo=VOUT 0.98 5 5 5 limit current 150 300 450 3 - 50 - Short current mA I SHORT Vo=0V 5 - - 40 STBY pull-down resistor 1100 2200 k RSTB 550 V ON VSTBH 1.5 - Vcc STBY control voltage OFF - 0.3 V VSTBL -0.3 5 BH25,28,29,30,31,33WHFV/G BH MA3WHFV Parameter Symbol Min. Typ. Max. Unit Conditions VOUT VOUT V IOUT=1mA I GND - 65 95 A IOUT=1mA I STBY - - 1.0 A STBY=0V - 60 - dB VRR=-20dBv, fRR=1kHz, IOUT=10mA RR VSAT1 - 60 90 mV VIN=0.98 X VOUT, IOUT=100mA - 2 20 mV VIN=VOUT+0.5V to 5.5V VDL1 - 6 30 mV IOUT=1mA to 100mA VDL01 VDL02 - 18 mV IOUT=1mA to 300mA 90 - ppm/ C IOUT=1mA, Ta=-40 to +85 C - 100 mA ILMAX - 600 - Vo=VOUT X 0.85 - 100 - mA I SHORT Vo=0V www.rohm.com 2/8 2010.07 - Rev. C 2010 ROHM Co., Ltd. All rights reserved.