BU4030B ROHM

Datasheet General Purpose CMOS Logic IC Quad 2-Input Exclusive-OR Gate BU4030B BU4030BF General Description Key Specifications BU4030B, BU4030BF consist of four independent Operating Supply Voltage Range: +3V to +16V 2-input Exclusive-OR gates. An inverter-based buffer is Input Voltage Range: 0V to V DD incorporated at the gate output to improve I/O Operating Temperature Range: -40C to +85C transmission characteristics, and it minimizes a variation in the propagation time caused by an increase in the load capacitance. Packages W(Typ) x D(Typ) x H(Max) Features DIP14 19.40mm x 6.50mm x 7.95mm Low Power Consumption SOP14 8.70mm x 6.20mm x 1.71mm High Noise Immunity Wide Operating Supply Voltage Range High Input Impedance High Fan Out 2 L-TTL Inputs or 1 LS-TTL Input can be directly driven All Outputs are buffered DIP14 SOP14 Pin Configurations BU4030B BU4030BF (Top View) VDD A4 B4 B3 O3 A3 O4 A1 B1 O1 A2 O2 B2 VSS Truth Table INPUT OUTPUT A B O L L L L H H H L H H H L Product structure: Silicon monolithic integrated circuit This product has no designed protection against radioactive rays www.rohm.com TSZ02201-0RDR1GZ00040-1-2 2013 ROHM Co., Ltd. All rights reserved. 1/12 TSZ2211114001 09.Aug.2013 Rev.001DatasheetDatasheet BU4030B BU4030BF Pin Descriptions Pin No. Pin Name I/O Function 1 A1 I Input1 2 B1 I Input1 3 O1 O Output1 4 O2 O Output2 5 B2 I Input2 6 A2 I Input2 7 VSS - Ground 8 A3 I Input3 9 B3 I Input3 10 O3 O Output3 11 O4 O Output4 12 B4 I Input4 13 A4 I Input4 14 VDD - Power supply Absolute Maximum Ratings Parameter Symbol Rating Unit Supply Voltage V -0.3 to +18.0 V DD Input Voltage V -0.3 to V+0.3 V IN DD Input Current I 10 mA IN Operating Temperature Topr -40 to +85 C Storage Temperature Tstg -55 to +150 C Maximum Junction Temperature Tjmax +150 C (Note 1) DIP14 1.18 Power Dissipation Pd W (Note 2) SOP14 0.56 (Note 1) Reduce 9.5mW per 1C above 25C (Note 2) Mounted on 70mm x 70mm x 1.6mm glass epoxy board. Reduce 4.5mW per 1C above 25C Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. Recommended Operating Conditions Parameter Symbol Rating Unit Supply Voltage V +3.0 to +16.0 V DD Input Voltage V 0 to V V IN DD www.rohm.com TSZ02201-0RDR1GZ00040-1-2 2013 ROHM Co., Ltd. All rights reserved. 2/12 TSZ2211115001 09.Aug.2013 Rev.001