BU5265HFV-TR ROHM

Datasheet Comparators Input Full Swing, Push-pull Output CMOS Comparators BU5265HFV BU5265SHFV General Description Key Specifications BU5265HFV is input full swing, push pull output CMOS Operating Supply Voltage: comparator. BU5265SHFV has an expanded operating Single Supply +1.8V to +5.5V temperature range. These features low operating Split Supply 0.9V to 2.75V supply voltage of +1.8V to +5.5V(single supply), high Supply Current: 22A(Typ) speed operation and extremely low input bias current. Temperature Range: BU5265HFV -40C to +85C BU5265SHFV -40C to +105C Features Input Offset Current: 1pA (Typ) Low Operating Supply Voltage Input Bias Current: 1pA (Typ) Input Full Swing Push-pull Output Wide Operating Temperature Range(BU5265SHFV) Packages jW(Typ) x D(Typ) x H(Max) Low Input Bias Current HVSOF5 1.60mm x 1.60mm x 0.60mm Applications Limit Comparators Battery Monitor Multivibrators Consumer Electronics Pin Configuration BU5265HFV, BU5265SHFV: HVSOF5 Pin No. Pin Name IN- 1 5 VDD 1 IN- - VSS 2 2 VSS + 3 IN+ IN+3 4 OUT 4 OUT 5 VDD Package HVSOF5 BU5265HFV BU5265SHFV Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0GMG0G200430-1-2 2013 ROHM Co., Ltd. All rights reserved. 1/17 23.Sep.2016 Rev.002 TSZ2211114001 Datasheet BU5265HFV BU5265SHFV Ordering Information B U 5 2 6 5 x x x x - T R Part Number Package Packaging and Forming Specification BU5265HFV HFV : HVSOF5 TR: Embossed Tape and Reel BU5265SHFV Line-up Topr Package Orderable Part Number -40C to +85C BU5265HFV-TR HVSOF5 Reel of 3000 -40C to +105C BU5265SHFV-TR Absolute Maximum Ratings (TA=25C) Ratings Parameter Symbol Unit BU5265HFV BU5265SHFV Supply Voltage VDD - VSS +7 V (Note 1,2) Power Dissipation PD 0.54 W (Note 3) Differential Input Voltage V VDD - VSS V ID Input Common-mode V (VSS-0.3) to (VDD+0.3) V ICM Voltage Range (Note 4) Input Current II 10 mA Operating Supply Voltage Vopr +1.8 to +5.5 V Operating Temperature T -40 to +85 -40 to +105 C opr Storage Temperature Tstg -55 to +125 C Maximum TJmax +125 C Junction Temperature (Note 1) To use at temperature above TA=25C reduce 5.4mW/C. (Note 2) Mounted on a FR4 glass epoxy PCB70mm70mm1.6mm (copper foil area less than 3%). (Note 3) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VSS. (Note 4) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied. The input current can be set to less than the rated current by adding a limiting resistor. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0GMG0G200430-1-2 2013 ROHM Co., Ltd. All rights reserved. 2/17 23.Sep.2016 Rev.002 TSZ2211115001