BU7205SHFV-TR ROHM

Datasheet Operational Amplifiers Ultra Low Supply Current Input/Output Full Swing CMOS Operational Amplifiers BU7205HFV BU7205SHFV General Description Key Specifications The BU7205HFV is an ultra-low supply current and Operating Supply Voltage (single supply): input/output full swing CMOS operational amplifier. +1.8V to +5.5V The BU7205SHFV has an expanded temperature Supply Current: 0.4A(Typ) range. These features low operating supply voltage Temperature Range: and low input bias current, suitable for battery-powered BU7205HFV -40C to +85C equipment and sensor amplifiers. BU7205SHFV -40C to +105C Input Offset Current: 1pA (Typ) Features Input Bias Current: 1pA (Typ) Ultra-Low Supply Current Low Operating Supply Voltage Packages W(Typ) x D(Typ) x H(Max) Input/Output Full Swing HVSOF5 1.60mm x 1.60mm x 0.60mm Wide Operating Temperature Range (BU7205SHFV) Low Input Bias Current Applications Battery-powered Equipment Sensor Amplifiers Portable Equipment Consumer Equipment Pin Configuration BU7205HFV, BU7205SHFV: HVSOF5 Pin No. Pin Name IN+ 1 5 VDD 1 IN+ + 2 VSS 2 VSS - 3 IN- IN-3 4 OUT 4 OUT 5 VDD Package HVSOF5 BU7205HFV BU7205SHFV Ordering Information B U 7 2 0 5 x H F V - T R Part Number Package Packaging and forming specification BU7205HFV HFV : HVSOF5 TR: Embossed tape and reel BU7205SHFV Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0RAR0G200280-1-2 2014 ROHM Co., Ltd. All rights reserved. 1/18 06.Jan.2014 Rev.001 TSZ2211114001 Datasheet BU7205HFV BU7205SHFV Line-up T Package Orderable Part Number opr -40C to +85C HVSOF5 Reel of 3000 BU7205HFV-TR -40C to +105C HVSOF5 Reel of 3000 BU7205SHFV-TR Absolute Maximum Ratings (T =25C) A Rating Parameter Symbol Unit BU7205SHFV BU7205HFV Supply Voltage VDD-VSS +7 V (Note 1,2) Power Dissipation P HVSOF5 0.53 W D (Note 3) Differential Input Voltage V VDD - VSS V ID Input Common-mode Voltage Range V (VSS-0.3) to (VDD+0.3) V ICM (Note 4) Input Current I 10 mA I Operating Supply Voltage V +1.8 to +5.5 V opr Operating Temperature T -40 to +85 -40 to +105 C opr Storage Temperature T -55 to +125 C stg Maximum Junction Temperature T +125 C Jmax (Note 1) To use at temperature above T =25C reduce 5.3mW. A (Note 2) Mounted on a FR4 glass epoxy PCB 70mm70mm1.6mm (Copper foil area less than 3%). (Note 3) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VSS. (Note 4) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied. The input current can be set to less than the rated current by adding a limiting resistor. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0RAR0G200280-1-2 2014 ROHM Co., Ltd. All rights reserved. 2/18 06.Jan.2014 Rev.001 TSZ2211115001