BU7255HFV-TR ROHM

Datasheet Operational Amplifiers Input/Output Full Swing Low Voltage Operation High Speed CMOS Operational Amplifiers BU7255HFV BU7255SHFV General Description Key Specifications BU7255HFV and BU7255SHFV are low-voltage CMOS Operating Supply Voltage (single supply): operational amplifiers. BU7255SHFV has a wider +2.4V to +5.5V operating temperature range. These have features of low Slew Rate: 3.4V/s(Typ) supply current, high slew rate, and low input bias current. Temperature Range: These are suitable for mobile equipment and sensor BU7255HFV -40C to +85C amplifiers. BU7255SHFV -40C to +105C Input Offset Current: 1pA(Typ) Input Bias Current: 1pA(Typ) Features Low Operating Supply Voltage Input/Output Full Swing Package W(Typ) x D(Typ) x H(Max) High Slew Rate HVSOF5 1.60mm x 1.60mm x 0.60mm Wide Operating Temperature Range (BU7255SHFV) Low Input Bias Current Applications Buffer Active Filter Sensor Amplifier Mobile Equipment Pin Configuration BU7255HFV, BU7255SHFV : HVSOF5 Pin No. Pin Name 1 IN+ IN+ 1 5 VDD 2 VSS + 3 IN- VSS 2 - 4 OUT IN-3 4 OUT 5 VDD Package HVSOF5 BU7255HFV BU7255SHFV Ordering Information B U 7 2 5 5 x x x x - T R Part Number Package Packaging and forming specification BU7255HFV HFV : HVSOF5 TR: Embossed tape and reel BU7255SHFV Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0GMG0G200360-1-2 2014 ROHM Co., Ltd. All rights reserved. 1/18 21.Oct.2016 Rev.003 TSZ2211114001 BU7255HFV BU7255SHFV Datasheet Line-up Topr Package Orderable Part Number -40C to +85C HVSOF5 Reel of 3000 BU7255HFV-TR -40C to +105C HVSOF5 Reel of 3000 BU7255SHFV-TR Absolute Maximum Ratings (T =25C) A Rating Parameter Symbol Unit BU7255HFV BU7255SHFV Supply Voltage VDD-VSS +7 V (Note 1,2) Power Dissipation P 0.53 W D Differential Input V VDD - VSS V (Note 3) ID Voltage Input Common-mode V (VSS-0.3) to (VDD+0.3) V ICM Voltage Range (Note 4) Input Current I 10 mA I Operating Supply Voltage V +2.4 to +5.5 V opr Operating Temperature T -40 to +85 -40 to +105 C opr Storage Temperature T -55 to +125 C stg Maximum T +125 C Jmax Junction Temperature (Note 1) To use at temperature above T =25C reduce 5.35mW. A (Note 2) Mounted on a FR4 glass epoxy PCB 70mm70mm1.6mm (Copper foil area less than 3%) (Note 3) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VSS. (Note 4) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied. The input current can be set to less than the rated current by adding a limiting resistor. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0GMG0G200360-1-2 2014 ROHM Co., Ltd. All rights reserved. 2/18 21.Oct.2016 Rev.003 TSZ2211115001