BU7445SHFV-TR ROHM

Datasheet Operational Amplifiers Ground Sense Low Voltage Operation CMOS Operational Amplifiers BU7445HFV BU7445SHFV General Description Key Specifications The BU7445HFV is an input ground sense output full Operating Supply Voltage (single supply): swing CMOS operational amplifier. The BU7445SHFV +1.7V to +5.5V has expanded temperature range. They have feature Supply Current: 40A(Typ) of low operating supply voltage, low supply current and Temperature Range: low input bias current. These are suitable for battery BU7445HFV -40C to +85C powered equipment and sensor amplifiers. BU7445SHFV -40C to +105C Input Offset Current: 1pA (Typ) Input Bias Current: 1pA (Typ) Features Low Supply Current Low Operating Supply Voltage Packages W(Typ) x D(Typ) x H(Max) Wide Temperature Range 1.60mm x 1.60mm x 0.60mm HVSOF5 Low Input Bias Current Input Ground Sense, Output Full Swing Applications Sensor Amplifier Portable Equipment Battery-powered Equipment Consumer Equipment Pin Configuration BU7445HFV, BU7445SHFV: HVSOF5 Pin No. Pin Name IN+ 1 5 VDD 1 IN+ + 2 VSS 2 VSS - 3 IN- 3 4 OUT IN- 4 OUT 5 VDD Package HVSOF5 BU7445HFV BU7445SHFV Ordering Information B U 7 4 4 5 x x x x - x x Part Number Package Packaging and forming specification BU7445HFV HFV : HVSOF5 TR: Embossed tape and reel BU7445SHFV Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0RAR0G200180-1-2 2014 ROHM Co., Ltd. All rights reserved. 1/18 17.Jan.2014 Rev.001 TSZ2211114001 Datasheet BU7445HFV BU7445SHFV Line-up T Package Orderable Part Number opr -40C to +85C HVSOF5 Reel of 3000 BU7445HFV-TR -40C to +105C HVSOF5 Reel of 3000 BU7445SHFV-TR Absolute Maximum Ratings (T =25C) A Rating Parameter Symbol Unit BU7445HFV BU7445SHFV Supply Voltage VDD-VSS +7 V (Note 1,2) Power Dissipation P 0.53 W D Differential Input (Note 3) V VDD - VSS V ID Voltage Input Common-mode V (VSS - 0.3) to (VDD + 0.3) V ICM Voltage Range (Note 4) Input Current I 10 mA I Operating Supply Voltage V +1.7 to +5.5 V opr Operating Temperature T -40 to +85 -40 to +105 C opr Storage Temperature T -55 to +125 C stg Maximum T +125 C Jmax Junction Temperature (Note 1) To use at temperature above T =25C reduce 5.3mW. A (Note 2) Mounted on a FR4 glass epoxy PCB 70mm70mm1.6mm (Copper foil area less than 3%) (Note 3) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VSS. (Note 4) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied. The input current can be set to less than the rated current by adding a limiting resistor. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0RAR0G200180-1-2 2014 ROHM Co., Ltd. All rights reserved. 2/18 17.Jan.2014 Rev.001 TSZ2211115001