BU7465HFV-TR ROHM

Datasheet Operational Amplifiers Ultra Low Supply Current CMOS Operational Amplifiers BU7475HFV BU7475SHFV General Description Key Specifications The BU7475HFV is low voltage operation input ground Operating Supply Voltage (single supply): sense output full swing CMOS operational amplifier. +1.7V to +5.5V The BU7475SHFV has expanded temperature range. Supply Current: 9A(Typ) They have feature of low supply current and low input Temperature Range: bias current. These are suitable for battery powered BU7475HFV -40C to +85C equipment and sensor amplifiers. BU7475SHFV -40C to +105C Input Offset Current: 1pA (Typ) Input Bias Current: 1pA (Typ) Features Ultra-low Supply Current Wide Operating Temperature Range Packages W(Typ) x D(Typ) x H(Max) Low Input Bias Current 1.60mm x 1.60mm x 0.60mm HVSOF5 Able to Operate at Low Power Applications Battery-powered Equipment Consumer Equipment Sensor Application Portable Equipment Pin Configuration BU7475HFV, BU7475SHFV: HVSOF5 Pin No. Pin Name IN+ 1 5 VDD 1 IN+ + 2 VSS VSS 2 - 3 IN- IN-3 4 OUT 4 OUT 5 VDD Package HVSOF5 BU7475HFV BU7475SHFV Ordering Information B U 7 4 7 5 x x x x - x x Part Number Package Packaging and forming specification BU7475HFV HFV : HVSOF5 TR: Embossed tape and reel BU7475SHFV Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0RAR0G200330-1-2 2013 ROHM Co., Ltd. All rights reserved. 1/18 6.Dec.2013 Rev.001 TSZ2211114001 Datasheet BU7475HFV BU7475SHFV Line-up Topr Package Orderable Part Number -40C to +85C HVSOF5 Reel of 3000 BU7475HFV-TR -40C to +105C HVSOF5 Reel of 3000 BU7475SHFV-TR Absolute Maximum Ratings (T =25C) A Rating Parameter Symbol Unit BU7475HFV BU7475SHFV Supply Voltage VDD-VSS +7 V (Note 1,2) Power Dissipation P 0.53 W D Differential Input (Note 3) V VDD - VSS V ID Voltage Input Common-mode V (VSS - 0.3) to VDD + 0.3 V ICM Voltage Range (Note 4) Input Current I 10 mA I Operating Supply Voltage V +1.7 to +5.5 V opr Operating Temperature T -40 to +85 -40 to +105 C opr Storage Temperature T -55 to +125 C stg Maximum T +125 C Jmax Junction Temperature (Note 1) To use at temperature above T =25C reduce 5.4mW. A (Note 2) Mounted on a FR4 glass epoxy PCB 70mm70mm1.6mm (Copper foil area less than 3%) (Note 3) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VSS. (Note 4) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied. The input current can be set to less than the rated current by adding a limiting resistor. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0RAR0G200330-1-2 2013 ROHM Co., Ltd. All rights reserved. 2/18 6.Dec.2013 Rev.001 TSZ2211115001