BU7495HFV-TR ROHM

Datasheet Operational Amplifiers Low Voltage Operation High Speed CMOS Operational Amplifiers BU7495HFV BU7495SHFV General Description Key Specifications The BU7495HFV is low voltage operation CMOS Operating Supply Voltage (single supply): operational amplifier. The BU7495SHFV has expanded +1.7V to +5.5V temperature range. They have feature of low supply Slew Rate: 5.0V/s current high slew rate and low input bias current. Temperature Range: These are suitable for mobile equipment and sensor BU7495HFV -40C to +85C amplifiers. BU7495SHFV -40C to +105C Input Offset Current: 1pA (Typ) Input Bias Current: 1pA (Typ) Features Low Operating Supply Voltage Low Supply Current Packages W(Typ) x D(Typ) x H(Max) Output Full Swing 1.60mm x 1.60mm x 0.60mm HVSOF5 Wide Operating Temperature Range(BU7495SHFV) Low Input Bias Current High Slew Rate Applications Buffer Active Filter Sensor Amplifier Mobile Equipment Pin Configuration BU7495HFV, BU7495SHFV: HVSOF5 Pin No. Pin Name IN+ 1 5 VDD 1 IN+ + 2 VSS VSS 2 - 3 IN- IN-3 4 OUT 4 OUT 5 VDD Package HVSOF5 BU7495HFV BU7495SHFV Ordering Information B U 7 4 9 5 x x x x - T R Part Number Package Packaging and forming specification BU7495HFV HFV : HVSOF5 TR: Embossed tape and reel BU7495SHFV Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0RAR0G200350-1-2 2014 ROHM Co., Ltd. All rights reserved. 1/19 6.Jan.2014 Rev.001 TSZ2211114001 Datasheet BU7495HFV BU7495SHFV Line-up Topr Package Orderable Part Number -40C to +85C HVSOF5 Reel of 3000 BU7495HFV-TR -40C to +105C HVSOF5 Reel of 3000 BU7495SHFV-TR Absolute Maximum Ratings (T =25C) A Rating Parameter Symbol Unit BU7495SHFV BU7495HFV Supply Voltage VDD-VSS +7 V (Note 1,2) Power Dissipation P 0.53 W D Differential Input (Note 3) V VDD - VSS V ID Voltage Input Common-mode V (VSS-0.3) to (VDD+0.3) V ICM Voltage Range (Note 4) Input Current I 10 mA I Operating Supply Voltage V +1.7 to +5.5 V opr Operating Temperature T -40 to +85 -40 to +105 C opr Storage Temperature T -55 to +125 C stg Maximum T +125 C Jmax Junction Temperature (Note 1) To use at temperature above T =25C reduce 5.3mW. A (Note 2) Mounted on a FR4 glass epoxy PCB 70mm70mm1.6mm (Copper foil area less than 3%) (Note 3) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VSS. (Note 4) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied. The input current can be set to less than the rated current by adding a limiting resistor. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0RAR0G200350-1-2 2014 ROHM Co., Ltd. All rights reserved. 2/19 6.Jan.2014 Rev.001 TSZ2211115001