Datasheet Operational Amplifiers Ground Sense Operational Amplifiers LM358xxx LM324xxx LM2904xxx LM2902xxx General Description Key Specifications LM358xxx and LM2904xxx series are dual ground Operating Supply Voltage (Single Supply): sense operational amplifiers. LM324xxx and 3.0V to 32.0V LM2902xxx series are quad. These have features of Operating Temperature Range: low current consumption and wide operating voltage LM358xxx: -40C to +85C range from 3V to 32V (single power supply). LM324xxx: -40C to +85C LM2904xxx: -40C to +125C LM2902xxx: -40C to +125C Features Input Offset Voltage: 4.5mV (Max) Operable with a Single Power Supply Input Bias Current: 20nA (Typ) Wide Operating Supply Voltage Range Input/output Ground Sense High Large Signal Voltage Gain Packages W(Typ) x D(Typ) x H(Max) SOP8 5.00mm x 6.20mm x 1.71mm Applications SOP-J8 4.90mm x 6.00mm x 1.65mm Current Sense Application SSOP-B8 3.00mm x 6.40mm x 1.35mm Buffer Application Amplifier TSSOP-B8 3.00mm x 6.40mm x 1.20mm Active Filter TSSOP-B8J 3.00mm x 4.90mm x 1.10mm Consumer Electronics MSOP8 2.90mm x 4.00mm x 0.90mm SOP14 8.70mm x 6.20mm x 1.71mm SOP-J14 8.65mm x 6.00mm x 1.65mm SSOP-B14 5.00mm x 6.40mm x 1.35mm TSSOP-B14J 5.00mm x 6.40mm x 1.20mm Pin Configuration LM358F, LM2904F : SOP8 LM358FJ, LM2904FJ : SOP-J8 LM358FV, LM2904FV : SSOP-B8 LM358FVT, LM2904FVT : TSSOP-B8 LM358FVJ, LM2904FVJ : TSSOP-B8J LM358FVM, LM2904FVM : MSOP8 Pin No. Pin Name 1 OUT1 1 8 OUT1 VCC 2 -IN1 3 +IN1 2 CH1 7 -IN1 OUT2 + - + 4 VEE +IN1 3 CH2 6 -IN2 5 +IN2 - + 6 -IN2 4 5 +IN2 VEE 7 OUT2 8 VCC Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0GMG0G200190-1-2 2015 ROHM Co., Ltd. All rights reserved. 1/44 11.Dec.2020 Rev.006 TSZ22111 14 001 Datasheet LM358xxx LM324xxx LM2904xxx LM2902xxx LM324F, LM2902F : SOP14 LM324FJ, LM2902FJ : SOP-J14 LM324FV, LM2902FV : SSOP-B14 LM324FVJ, LM2902FVJ : TSSOP-B14J Pin No. Pin Name 1 OUT1 OUT1 1 14 OUT4 2 -IN1 3 +IN1 2 13 -IN1 -IN4 CH1 CH4 - 4 VCC - + + 3 12 +IN4 +IN1 5 +IN2 6 -IN2 4 11 VEE VCC 7 OUT2 +IN2 5 10 +IN3 8 OUT3 - - + + CH2 CH 9 -IN3 -IN2 6 9 -IN3 3 10 +IN3 7 8 OUT2 OUT3 11 VEE 12 +IN4 13 -IN4 14 OUT4 Absolute Maximum Ratings (TA=25C) Rating Parameter Symbol Unit LM358xxx LM324xxx LM2904xxx LM2902xxx Supply Voltage VCC-VEE 36 V (Note 1,9) (Note 1,9) SOP8 0.68 - 0.68 - (Note 2,9) (Note 2,9) SOP-J8 0.67 - 0.67 - (Note 3,9) (Note 3,9) 0.62 - 0.62 - SSOP-B8 (Note 3,9) (Note 3,9) TSSOP-B8 0.62 - 0.62 - (Note 4,9) (Note 4,9) TSSOP-B8J 0.58 - 0.58 - Power Dissipation PD W (Note 4,9) (Note 4,9) MSOP8 0.58 - 0.58 - (Note 5,9) (Note 5,9) SOP14 - 0.56 - 0.56 (Note 6,9) (Note 6,9) - 1.02 - 1.02 SOP-J14 (Note 7,9) (Note 7,9) SSOP-B14 - 0.87 - 0.87 (Note 8,9) (Note 8,9) TSSOP-B14J - 0.85 - 0.85 (Note 10) Differential Input Voltage VID 36 V Input Common-mode Voltage Range V ICM (VEE-0.3) to (VEE+36) V (Note 11) Input Current I 10 mA I Operating Supply Voltage Vopr 3.0 to 32.0 V Operating Temperature Range T opr -40 to +85 -40 to +125 C Storage Temperature Range T stg -55 to +150 C Maximum Junction Temperature Tjmax 150 C (Note 1) Reduce by 5.5mW per 1C above 25C. (Note 2) Reduce by 5.4mW per 1C above 25C. (Note 3) Reduce by 5.0mW per 1C above 25C. (Note 4) Reduce by 4.7mW per 1C above 25C. (Note 5) Reduce by 4.5mW per 1C above 25C. (Note 6) Reduce by 8.2mW per 1C above 25C. (Note 7) Reduce by 7.0mW per 1C above 25C. (Note 8) Reduce by 6.8mW per 1C above 25C. (Note 9) Mounted on an FR4 glass epoxy PCB 70mm70mm1.6mm (Copper foil area less than 3%). (Note 10) Differential Input Voltage is the voltage difference between the inverting and non-inverting inputs. The input pin voltage is set to more than VEE. (Note 11) An excessive input current will flow when input voltages of less than VEE-0.6V are applied. The input current can be set to less than the rated current by adding a limiting resistor. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0GMG0G200190-1-2 2015 ROHM Co., Ltd. All rights reserved. 2/44 11.Dec.2020 Rev.006 TSZ22111 15 001