Datasheet Operational Amplifiers Low Noise Operational Amplifier LM4565xxx Key Specifications General Description Operating Supply Voltage: 2V to 18V The LM4565xxx are low nose operational amplifiers Temperature Range: -40C to +85C with high voltage gain and wide bandwidth. They have Voltage Gain (R =2k ): 100dB(Typ) L good performance of input referred noise voltage Slew Rate: 5.0V/ s (Typ) (5 nV/ Hz ) and total harmonic distortion (0.0002%). Gain Bandwidth: 10MHz (Typ) These are suitable for audio applications and active Input Referred Noise Voltage: 5 nV/ Hz (Typ) filter. Package W(Typ) xD(Typ) xH(Max) Features SOP-8 5.00mm x 6.20mm x 1.71mm High Voltage Gain SOP-J8 4.90mm x 6.00mm x 1.65mm High Slew Rate SSOP-B8 3.00mm x 6.40mm x 1.35mm Low Input Referred Noise Voltage TSSOP-B8 3.00mm x 6.40mm x 1.20mm Low Total Harmonic Distortion MSOP8 2.90mm x 4.00mm x 0.90mm Wide Gain Bandwidth TSSOP-B8J 3.00mm x 4.90mm x 1.10mm Application Audio Application Consumer Equipment Active Filter Pin Configuration LM4565F : SOP8 LM4565FJ : SOP-J8 LM4565FV : SSOP-B8 LM4565FVT : TSSOP-B8 LM4565FVM : MSOP8 LM4565FVJ : TSSOP-B8J Pin No. Pin Name 1 OUT1 1 8 VCC OUT1 2 -IN1 CH1 -IN1 2 7 OUT2 -+ 3 +IN1 4 VEE 3 6 -IN2 +IN1 CH2 + - 5 +IN2 +IN2 VEE 4 5 6 -IN2 7 OUT2 8 VCC Figure1. Pin Configuration Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0RAR0G200590-1-2 2012 ROHM Co., Ltd. All rights reserved. 1/24 15.Apr.2014 Rev.003 TSZ2211114001 Datasheet LM4565xxx Ordering Information L M 4 5 6 5 x x x - x x Part Number Package Packaging and forming specification F : SOP8 LM4565xxx E2: Embossed tape and reel FJ : SOP-J8 (SOP8/SOP-J8/SSOP-B8/TSSOP-B8/TSSOP-B8J) FV : SSOP-B8 TR: Embossed tape and reel FVT : TSSOP-B8 (MSOP8) FVM : MSOP8 FVJ : TSSOP-B8J Line-up T Package Orderable Part Number opr SOP8 Reel of 2500 LM4565F-E2 SOP-J8 Reel of 2500 LM4565FJ-E2 SSOP-B8 Reel of 2500 LM4565FV-E2 -40C to +85C TSSOP-B8 Reel of 3000 LM4565FVT-E2 MSOP8 Reel of 3000 LM4565FVM-TR TSSOP-B8J Reel of 2500 LM4565FVJ-E2 Absolute Maximum Ratings (T =25C) A Parameter Symbol Rating Unit Supply Voltage VCC - VEE +36 V (Note 1,5) SOP8 0.68 (Note 2,5) SOP-J8 0.67 (Note 3,5) SSOP-B8 0.62 Power Dissipation P W D (Note 3,5) TSSOP-B8 0.62 (Note 4,5) MSOP8 0.58 (Note 4,5) TSSOP-B8J 0.58 (Note 6) Differential Input Voltage V +36 V ID Input Common-mode V (VEE - 0.3) to (VEE + 36) V ICM Voltage Range Operating Voltage V 2 to 18 V opr Operating Temperature T - 40 to +85 C opr Storage Temperature T - 55 to +150 C stg Maximum T +150 C Jmax Junction Temperature (Note 1) When used at temperature above T =25C, reduce by 5.5mW/C. A (Note 2) When used at temperature above T =25C, reduce by 5.4mW/C. A (Note 3) When used at temperature above T =25C, reduce by 5.0mW/C. A (Note 4) When used at temperature above T =25C, reduce by 4.7mW/C. A (Note 5) Mounted on a FR4 glass epoxy PCB(70mm70mm1.6mm). (Note 6) The differential input voltage is the voltage difference between inverting input and non-inverting input. Input terminal voltage is set to more than VEE. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0RAR0G200590-1-2 2012 ROHM Co., Ltd. All rights reserved. 2/24 15.Apr.2014 Rev.003 TSZ2211115001
