MCR03EZPFX1621 ROHM

Thick Film Chip Resistors MCR Series Features 1) Full line up from ultra small size (01005) to 2512 with jumper type. 2) High reliability metal glazed thick film. 3) ROHM resistors have obtained ISO9001/ISO/TS16949 certification. 4) Automotiv product is AEC-Q200 compliant. Size Type Code Packing AUTOMOTIVE Part No. Quantity / Reel Specification (mm) (inch) GENERAL PURPOSE Corresponds to AECQ200 Paper tape YZP 15,000 (2mm pitch) MCR004 0402 01005 Embossed tape RZP 40,000 (1mm pitch) MCR006 0603 0201 YRT YZP 15,000 Paper tape (2mm pitch) MRT MZP 10,000 MCR01 1005 0402 PZPI (*For further information on datasheet, Bulk case 50,000 please refer to AUTOMOTIVE datasheet.) Paper tape ERT EZP 5,000 (4mm pitch) MCR03 1608 0603 MZP : Paper tape MZP / PZPI MZP : 10,000 (*For further information on datasheet, (2mm pitch) PZPI : 25,000 please refer to AUTOMOTIVE datasheet.) PZPI : Bulk case MCR10 2012 0805 ERT EZP Paper tape 5,000 (4mm pitch) MCR18 3216 1206 ERT EZP MCR25 3225 1210 JZH Embossed tape 4,000 MCR50 5025 2010 JZH (4mm pitch) MCR100 6432 2512 JZH Please contact us for status of AEC-Q200 onGeneral purpos products. Part Number Description MRC 060 YTR J01 0 Part No. Size (mm inch ) Type Code Resistance Tolerance Nominal Resistance Resistance code, 3 or 4 digits. 004 (0402 01005 ) D ( 0.5% ) MCR 000 denotes jumper type. 006 (0603 0201 ) F ( 1% ) (Micro chip resistors) 01 (1005 0402 ) FX ( 1% ) Only MCR03EZP/MZP/PZPI Resistance Resistance 03 (1608 0603 ) J ( 5% ) (Including jumper type) tolerance code 10 (2012 0805 ) D,F : 4 digits 18 (3216 1206 ) J : 3 digits 25 (3225 1210 ) 50 (5025 2010 ) Ex.) 100 (6432 2512 ) 1 = 1R0 ( 5% ) 9.1 = 9R1 ( 5% ) 10 = 10R0 ( 0.5%,1% ) 100 ( 5% ) 2.2M = 2204 ( 1% ) 225 ( 5% ) www.rohm.com 2012.11 - Rev.D 1/11 c 2012 ROHM Co., Ltd. All rights reserved. MCR series < General Purpose > Data Sheet Products List Rated Power Limiting Element Maximum Temperature Resistance Operating (70C) Voltage Overload Coefficient Tolerance Temperature Part No. Type Code Resistance Range Series Voltage Range (W) (V) (V) (ppm / C) (%) (C) 600 / 200 1.0 to 9.1 J(5%) 300 10 to 91 250 100 to 3M E24 0.031 15 YZP, MCR004 300 10 to 91 RZP F(1%) 250 100 to 3M Jumper type : Rmax = 50m / Imax. = 0.5A 55 to +125 600 / 200 1.0 to 9.1 J(5%) 250 10 to 10M 0.05 25 E24 MCR006 YRT 250 F(1%) 10 to 10M 200 D(0.5%) 10 to 1M Jumper type : Rmax = 50m / Imax. = 0.5A +500 / 250 1.0 to 9.1 J(5%) E24 200 10 to 10M 100 10 to 976k 0.063 50 F(1%) MCR01 MRT E24,E96 200 1M to 2.2M 100 D(0.5%) 10 to 1M E24 Jumper type : Rmax = 50m / Imax. = 1A 400 1.0 to 9.1 J(5%) E24 200 10 to 10M 100 10 to 976k 0.1 50 100 F(1%) MCR03 ERT 200 1M to 10M E24,E96 100 D(0.5%) 10 to 1M Jumper type : Rmax = 50m / Imax. = 1A 400 1.0 to 9.1 J(5%) E24 200 10 to 10M 0.125 150 200 MCR10 ERT 100 10 to 976k F(1%) E24,E96 200 1M to 2.2M Jumper type : Rmax = 50m / Imax. = 2A 55 to +155 400 1.0 to 9.1 J(5%) E24 200 10 to 10M 0.25 200 400 MCR18 ERT 100 10 to 976k F(1%) E24,E96 200 1M to 2.2M Jumper type : Rmax = 50m / Imax. = 2A 500350 1.0 to 2.0 500 J(5%) 2.2 to 5.1 E24 0.25 200 400 MCR25 JZH 200 5.6 to 3.3M 100 F(1%) 10 to 1M E24,E96 Jumper type : Rmax = 50m / Imax. = 2A 500350 1.0 to 2.0 500 2.2 to 9.1 J(5%) E24 200 10 to 330k 0.5 200 400 MCR50 JZH 350 360k to 560k 100 F(1%) 10 to 180k E24,E96 Jumper type : Rmax = 50m / Imax. = 3A 500350 1.0 to 2.0 500 2.2 to 9.1 J(5%) E24 350 10 to 22 1 200 400 MCR100 JZH 55 to +125 200 24 to 100k 100 F(1%) 10 to 82k E24,E96 Jumper type : Rmax = 50m / Imax. = 4A Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product before using or ordering it. www.rohm.com 2012.11 - Rev.D 2/11 c 2012 ROHM Co., Ltd. All rights reserved.