MCR03EZPJ183 ROHM

Thick Film Chip Resistors MCR Series < Not for Automotive application > Datasheet Features 1) Full line up from ultra small size (01005) to 2512 with jumper type. 2) ROHM resistors have obtained ISO9001/ISO/TS16949 certification. Size Packing Part No. Type Code Quantity / Reel Specification (mm) (inch) 0603 0201 YRT 15,000 MCR006 Paper tape (2mm pitch) MCR01 1005 0402 MRT 10,000 MCR03 1608 0603 ERT 5,000 2012 0805 MCR10 Paper tape (4mm pitch) MCR18 3216 1206 MCR25 3225 1210 4,000 MCR50 5025 2010 JRT Embossed tape (4mm pitch) 6432 2512 MCR100 Part Number Description MRC 060Y RT J010 (mm inch ) Part No. Size Type Code Resistance Tolerance Nominal Resistance Resistance code, 3 or 4 digits. 006 (0603 0201 ) D ( 0.5% ) MCR 000 denotes jumper type. 01 (1005 0402 ) F ( 1% ) (Micro chip resistors) 03 (1608 0603 ) J ( 5% ) (Including jumper type) Resistance Resistance tolerance code 10 (2012 0805 ) 18 (3216 1206 ) D,F : 4 digits 25 (3225 1210 ) J : 3 digits 50 (5025 2010 ) 100 (6432 2512 ) Ex.) 1 = 1R0 ( 5% ) 9.1 = 9R1 ( 5% ) 10 = 10R0 ( 0.5%,1% ) 100 ( 5% ) 2.2M = 2204 ( 1% ) 225 ( 5% ) www.rohm.com 1/6 c 2015 ROHM Co., Ltd. All rights reserved. 2015.02 - Rev.F MCR series < Not for Automotive application > Datasheet Products List Rated Power Limiting Element Temperature Resistance Operating (70C) Voltage Coefficient Tolerance Temperature Part No. Type Code Resistance Range Series Range (W) (V) (ppm / C) (%) (C) +600 / 200 1.0 to 9.1 J(5%) 250 10 to 10M E24 0.05 25 250 F(1%) 10 to 10M 55 to +125 MCR006 YRT 200 10 to 910 D(0.5%) 100 1k to 1M Jumper type : Rmax = 50m / Imax. = 0.5A +500 / 250 1.0 to 9.1 J(5%) E24 200 10 to 10M 10 to 976k 100 F(1%) 10 to 2.2M 0.063 50 E24,E96 MCR01 MRT 1M to 2.2M 100 10 to 91 E24 D(0.5%) 50 100 to 1M Jumper type : Rmax = 50m / Imax. = 1A 400 1.0 to 9.1 J(5%) E24 200 10 to 10M 10 to 976k 100 F(1%) 10 to 10M 0.1 50 MCR03 ERT 1M to 10M E24,E96 100 10 to 91 D(0.5%) 50 100 to 1M Jumper type : Rmax = 50m / Imax. = 1A 400 1.0 to 9.1 J(5%) E24 200 10 to 10M 0.125 10 to 976k 10 to 2.2M 150 100 F(1%) E24,E96 MCR10 ERT 1M to 2.2M 100 10 to 91 D(0.5%) E24 0.1 50 100 to 1M 55 to +155 Jumper type : Rmax = 50m / Imax. = 2A 400 1.0 to 9.1 E24 J(5%) 200 10 to 10M 0.25 10 to 976k 200 100 F(1%) 10 to 2.2M ERT MCR18 1M to 2.2M E24,E96 to 100 10 91 D(0.5%) 0.125 50 100 to 1M Jumper type : Rmax = 50m / Imax. = 2A 200 1.0 to 9.1 E24 J(5%) 0.25 200 100 10 to 3.3M MCR25 JRT 100 F(1%) 10 to 1M E24,E96 Jumper type : Rmax = 50m / Imax. = 2A 250 1.0 to 9.1 J(5%) E24 0.5 200 100 10 560k to MCR50 JRT 100 F(1%) 10 to 180k E24,E96 Jumper type : Rmax = 50m / Imax. = 2A 250 1.0 to 9.1 J(5%) E24 100 10 100k 1 200 to 55 to +125 MCR100 JRT 100 F(1%) 10 to 82k E24,E96 Jumper type : Rmax = 50m / Imax. =2A Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product before using or ordering it. Rated voltage is determained from the following. When rated voltage exceeds the limiting element voltage, the limitng element voltage shall be the rated voltage. Rated voltage = Rated power Rasistance www.rohm.com 2/6 c 2015 ROHM Co., Ltd. All rights reserved. 2015.02 - Rev.F