PRODUCTS PAGE TYPE Surface Mount SMLP13WBC8W1 Chip LED < Specifications (Precautions and Prohibitions) > Precaution for circuit design 1) The products are designed and produced for application in ordinary electronic equipment (AV equipment, OA equipment, telecommunication equipment, home appliances, amusement equipment, etc.). If the products are to be used in devices requiring extremely high reliability (medical equipment, transport equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or operational error may endanger human life and sufficient fail-safe measures, please consult with the ROHM sales staff in advance. If product malfunctions may result in serious damage, including that to human life, sufficient fail-safe measures must be taken, including the following: a Installation of protection circuits or other protective devices to improve system safety b Installation of redundant circuits in the case of single-circuit failure 2) The products are designed for use in a standard environment and not in any special environments. Application of the products in a special environment can deteriorate product performance. Accordingly, verification and confirmation of product performance, prior to use, is recommended if used under the following conditions: a Use in various types of liquid, including water, oils, chemicals, and organic solvents b Use outdoors where the products are exposed to direct sunlight, or in dusty places c Use in places where the products are exposed to sea winds or corrosive gases, including Cl , H S, NH , SO , and NO 2 2 3 2 2 d Use in places where the products are exposed to static electricity or electromagnetic waves e Use in proximity to heat-producing components, plastic cords, or other flammable items f Use involving sealing or coating the products with resin or other coating materials g Use involving unclean solder or use of water or water-soluble cleaning agents for cleaning after soldering h Use of the products in places subject to dew condensation 3) The products are not radiation resistant. 4) The Company is not responsible for any problems resulting from use of the products under conditions not recommended herein. 5) The Company should be notified of any product safety issues. Moreover, product safety issues should be periodically monitored by the customer. 6) De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual ambient temperature. 7) Confirm that operation temperature is within the specified range described in product specification. 8) Failure induced under deviant condition from what defined in the product specification can not be guaranteed. 9) When product safety related problems arises, please immediately inform to ROHM, and consider technical counter measure. DESIGN CHECK APPROVAL DATE:Dec./28/2010 SPECIFICATION No. TENTATIVE (20101228) M.Kobayakawa T.Nakagawa H.Toda REV. TSZ2211104002 PRODUCTS PAGE TYPE Surface Mount SMLP13WBC8W1 Chip LED < Specifications (Precautions and Prohibitions) > Precaution for Mounting / Circuit board design When a highly active halogenous (chlorine, bromine, etc.) flux is used, the remainder of flux may negatively affect product performance and reliability. Precautions Regarding Application Examples and External Circuits 1) If change is made to the constant of an external circuit, allow a sufficient margin due to variations of the characteristics of the products and external components, including transient characteristics, as well as static characteristics. 2) The application examples, their constants, and other types of information contained herein are applicable only when the products are used in accordance with standard methods. Therefore, if mass production is intended, sufficient consideration to external conditions must be made. Precautions for Electrostatic This product is Electrostatic sensitive product, which may be damaged due to Electrostatic discharge. Please take proper caution during manufacturing and storing so that voltage exceeding product maximum rating wont be applied to products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precautions for product label QR code printed on ROHM product label is only for internal use, and please do not use at customer site. It might contain an internal part number that is inconsistent with a product part number. Precautions for disposition When disposing products please dispose them properly with an industry waste company. Precautions for Foreign exchange control regulation ROHM has not determined whether or not the products are considered a controlled product or labor as specified in the Foreign Exchange and Foreign Trade Control Law. Accordingly, if exportation of the products, either separately or integrated in another companys products, is intended, or giving the products to persons who are not residents is planed, additional steps are required, based upon the appropriate regulations. Prohibitions Regarding Industrial Property 1) These Specifications contain information related to the ROHM industrial property. Any use of them other than pertaining to the usage of appropriate products is not permitted. Duplication of these specifications and its disclosure to a third party without the Companys permission are prohibited. 2) Information and data on products, including application examples, contained in these specifications are simply for reference the company does not guarantee any industrial property rights, intellectual property rights, or any other rights of a third party regarding this information or data. Accordingly, the Company does not bear any responsibility for: a infringement of the intellectual property rights of a third party b any problems incurred by the use of the products listed herein 3) The Company prohibits the purchaser of its products to exercise or use the intellectual property rights, industrial property rights, or any other rights that either belong to or are controlled by the Company, other than the right to use, sell, or dispose of the products. SPECIFICATION No. TENTATIVE (20101228) REV. TSZ2211105002