02CK020-150 Rosenberger

Technical Data Sheet Calibration Kit RPC-2.92 02CK020-150 LRL Version Contents Calibration Device Part number Remarks QTY a Option 15 mm Air line plug/jack 02S101-K015 L1 1 FC 18.3 mm Air line plug/jack 02S101-K018 L2 1 FC 40 mm Air line plug/jack 02S101-K040 L3 1 FC Short circuit plug 02S12S-001D3 Reflect standard 1 FC Short circuit jack 02K12S-001D3 Reflect standard 1 FC Combi wrench 03W008-000 - 1 Torque wrench 03W021-000 - 1 FC a. See Declaration of calibration options for explanation. LRL calibrations without lowband loads are band limited. There are many different possibilities to calibrate a VNA depending from the line length and the number of lines used during the calibration procedure. If two lines are used the third line can be used as verification standard. The following graphs show two possibilities using LRL with lowband loads. Without lowband loads the lower band cannot be calibrated. Frequency Range (2 Bands) Frequency Range (3 Bands) Lowband loads L1 and L2 Lowband loads L1 and L2 L1 and L3 0 5 40 f in GHz 0 1 5 40 f in GHz Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel. : +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany Fax : +49 8684 18-499 www.rosenberger.de Email : info rosenberger.de 1 / 3 RF 35/05.10/6.1 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet Calibration Kit RPC-2.92 02CK020-150 LRL Version Documentation This kit is delivered with USB-Stick Standard Definitions as data files for Vector Network Anaylzer Families PNA (Keysight/Agilent) and ZVA (Rohde&Schwarz). Calibration Certificate as PDF-file. Standard Definitions Cards Printed Standard Definitions that can be used on nearly all Vector Network Analyzers. Kit Info Card Handling precautions and information for installing Standard Definitions on a Vector Network Analyzer. Calibration Certificate Details see Declaration of calibration options Operating Manual Electrical specifications This specification covers electrical key values for the main items of the calibration kit. Specific datasheets are available for each component among the part number. Device Frequency Parameter Specification 4 GHz 1.0 DC to b Error from Shorts > 4 GHz to 18 GHz 2.0 (plug and jack) Nominal Phase > 18 GHz to 40 GHz 3.0 4 GHz 38 dB 0.3 GHz to c Precision air lines > 4 GHz to Return Loss 18 GHz 35 dB > 18 GHz to 40 GHz 30 dB b. The specifications for the shorts are given as allowed deviation from nominal model as defined in calibration certificate included with your kit. c. Calculated value without warranty. The return loss specification includes the connector interfaces. The minimum frequency of the air lines is based on calculations of the impedance change due to skin depth. Refer to the calibration certificate included with your kit for the exact dimensions of your precision air lines. Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel. : +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany Fax : +49 8684 18-499 www.rosenberger.de Email : info rosenberger.de 2 / 3 RF 35/05.10/6.1 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG