Technical Data Sheet Longwipe- Straight Plug PCB 17S14D-400L5 Catchers mitt SMP All dimensions are in mm tolerances acc. ISO 2768 m-H Interface According to Rosenberger Longwipe SMP 17S/K000-000 Documents PCB layout B 30 Tape & reel packaging VG139.60000 Material and plating Connector parts Material Plating Center contact Brass AuroDur, gold plated Outer contact Brass AuroDur, gold plated Dielectric PEEK Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 1 / 2 RF 35/08.13/6.1 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet Longwipe- Straight Plug PCB 17S14D-400L5 Catchers mitt SMP Electrical data Impedance 50 Frequency DC to 6 GHz Return loss 28 dB DC to 3 GHz 23 dB 3 GHz to 6 GHz Insertion loss 0.05 x f GHz dB Insulation resistance 5 G Center contact resistance 6 m Outer contact resistance 2 m Test voltage (at sea level) 500 V rms Working voltage (at sea level) 335 V rms Contact Current 1.2A DC - Connector only, Return loss in application depends decisive on PCB layout Mechanical data Mating cycles if mating part is Smooth bore, Catchers mitt 1000 Center contact captivation 7 N Engagement force - Smooth bore, Catchers mitt 9 N Disengagement force - Smooth bore, Catchers mitt 2.2 N Environmental data Temperature range -65 C to +155 C Rapid change of temperature (related to SMP) IEC 60068-2-14 (-65C to 155C, 1h dwell, 50 cycles) Vibration (related to SMP) MIL-STD-202, Method 204, Condition B Shock (related to SMP) MIL-STD-202, Method 213, Condition A Damp heat (related to SMP) IEC 60068-2-78 (40C, 93% RH, 56d) High temperature endurance IEC 60169-1, Sub-clause 18 (+155C, 250 hours) Max. soldering temperature IEC 61760-1, +260 C for 10 sec. RoHS compliant Tooling N/A Suitable cables N/A Weight Weight 0.85 g/pce While the information has been carefully compiled to the best of our knowledge, nothing is For the installation of the intended as representation or warranty on our part and no statement herein shall be electrotechnical equipment, construed as recommendation to infringe existing patents. In the effort to improve our particular electrotechnical products, we reserve the right to make changes judged to be necessary. expertise is required. Draft Date Approved Date Rev. Engineering change number Name Date S. Mhlbacher 17.04.14 Chr. Janen 14.10.20 d00 20-1927 S. Huber-Siegl 14.10.20 Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 2 / 2 RF 35/08.13/6.1 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG