Technical Data Sheet Adaptor SMP 19K132-K00D3 SMP Jack SMA Jack All dimensions are in mm tolerances according to ISO 2768 m-H Interface According to SMP side: MIL-STD-348 SMA side: IEC 60169-15 EN 122110 MIL-STD-348 Documents N/A Material and plating Connector parts Material Plating Center contact CuBe Gold, min. 0.8 m, over chemical nickel Outer contact SMP side CuBe Gold, min. 1.27 m, over chemical nickel Outer contact SMA side Stainless steel Passivated Dielectric PTFE Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 1 / 2 RF 35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet Adaptor SMP 19K132-K00D3 SMP Jack SMA Jack Electrical data Impedance 50 Frequency DC to 26.5 GHz Return loss 35 dB, DC to 4 GHz 26 dB, 4 to 10 GHz 18 dB, 10 to 18 GHz Insertion loss 0.05 x f(GHz)dB Insulation resistance 5 G Center contact resistance 6.0 m , SMP side 3 m , SMA side Outer contact resistance 2.0 m , SMP side 2 m , SMA side Test voltage 500 V rms Working voltage 335 V rms Contact Current 1.2A DC max. Mechanical data SMP side SMA side Mating cycles min. 500 if mating part is smooth bore 1000 if mating part is limited detent 500 if mating part is full detent 100 Center contact captivation: axial 27 N 27 N Engagement force N/A - smooth bore 9 N max. - limited detent 45 N max. - full detent 68 N max. Disengagement force N/A - smooth bore 2.2 N min. - limited detent 9 N min. - full detent 22 N min. Coupling test torque N/A max. 1.7 Nm Recommended torque N/A 0.8 Nm to 1.1 Nm Environmental data Temperature range -65C to +155C Thermal shock MIL-STD-202, Method 107, Condition B Vibration MIL-STD-202, Method 204, Condition B Shock MIL-STD-202, Method 213, Condition A Moisture resistance MIL-STD-202, Method 106 RoHS compliant Tooling N/A Suitable cables N/A Weight Weight 4.6 g/pce While the information has been carefully compiled to the best of our knowledge, nothing is For the installation of the intended as representation or warranty on our part and no statement herein shall be electrotechnical equipment, construed as recommendation to infringe existing patents. In the effort to improve our particular electrotechnical products, we reserve the right to make changes judged to be necessary. expertise is required. Draft Date Approved Date Rev. Engineering change number Name Date Inge Mhlauer 17.08.04 Chr. Janen 26.10.20 f00 20-1927 S. Huber-Siegl 26.10.20 Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 2 / 2 RF 35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG