Technical Data Sheet SMP Right Angle Jack 19K207-271L5 All dimensions are in mm tolerances according to ISO 2768 m-H Interface According to MIL-STD-348 Documents Assembly instruction 19 E8 Material and plating Connector parts Material Plating Center contact CuBe AuroDur, gold plated Outer contact CuBe AuroDur, gold plated Dielectric PTFE Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 1 / 2 RF 35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet SMP Right Angle Jack 19K207-271L5 Electrical data Impedance 50 Frequency DC to 26.5 GHz Return loss 35 dB DC to 2 GHz 30 dB 2 GHz to 12 GHz 20 dB 12 GHz to 26 GHz Insertion loss 0.1 x f GHz dB Insulation resistance 5 G Center contact resistance 6 m Outer contact resistance 2 m Test voltage (at sea level) 500 V rms Working voltage (at sea level) 335 V rms Contact Current 1.2A DC - Limitations are possible due to the used cable type Mechanical data Mating cycles if mating part is Smooth bore, Catchers Mitt 1000 if mating part is Limited detent 500 if mating part is Full detent 100 Center contact captivation 7 N Engagement force - Smooth bore, Catchers Mitt 9 N - Limited detent 45 N - Full detent 68 N Disengagement force - Smooth bore, Catchers Mitt 2.2 N - Limited detent 9 N - Full detent 22 N Environmental data Temperature range -65 C to +155 C Rapid change of temperature IEC 60068-2-14 (-65 C to 155 C, 1h dwell, 50 cycles) Vibration MIL-STD-202, Method 204, Condition B Shock MIL-STD-202, Method 213, Condition A Damp heat IEC 60068-2-78 (40C, 93% RH, 56d) High temperature endurance IEC 61169-1, Sub-clause 9.6 (+155 C, 1000 hours) RoHS compliant Tooling N/A Suitable cables UT 85, RG 405 /U, RTK-FS 085 Weight Weight 0.5 g/pce While the information has been carefully compiled to the best of our knowledge, nothing is For the installation of the intended as representation or warranty on our part and no statement herein shall be electrotechnical equipment, construed as recommendation to infringe existing patents. In the effort to improve our particular electrotechnical products, we reserve the right to make changes judged to be necessary. expertise is required. Draft Date Approved Date Rev. Engineering change number Name Date S. Mhlbacher 06.02.17 Chr. Janen 27.10.20 b00 20-1927 S. Huber-Siegl 27.10.20 Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 2 / 2 RF 35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG