Technical Data Sheet Adaptor SMA 32K101-KH0L5 Jack - Jack All dimensions are in mm tolerances according to ISO 2768 m-H Interface According to IEC 60169-15, EN 122110, MIL-STD-348A, Fig. 310 Documents Panel piercing B 58 Material and plating Connector parts Material Plating Center contact CuBe AuroDur, gold plated Outer contact CuBe or equiv. AuroDur, gold plated Dielectric PTFE Gasket Silicone Glass seal Glass Internal tooth lock washer Stainless steel Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 1 / 2 RF 35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet Adaptor SMA 32K101-KH0L5 Jack - Jack Electrical data Impedance 50 Frequency DC to 18 GHz VSWR 1.12 + 0.018 x f GHz dB Insertion loss 0.03 x f(GHz) 3 Insulation resistance 5 x10 M Center contact resistance 3 m Outer contact resistance 2 m Test voltage 1000 V rms Working voltage 480 V rms Power handling (at 20 C, sea level, VSWR 1.0) 200 W 2 GHz RF-leakage 100 dB up to 1 GHz Mechanical data Mating cycles min. 500 Center contact captivation: axial 27 N radial 1 Ncm Coupling torque Standard: St. Steel, BeCu max. 1.7 Nm Recommended torque 0.8 Nm to 1.1 Nm Coupling torque Economy: CuZn max. 0.6 Nm Recommended torque 0.5 Nm Environmental data Temperature range -55C to +125C Thermal shock MIL-STD-202, Meth. 107, Cond. B Corrosion MIL-STD-202, Meth. 101, Cond. B Vibration MIL-STD-202, Meth. 204, Cond. D Shock MIL-STD-202, Meth. 213, Cond. I Moisture resistance MIL-STD-202, Meth. 106 -6 Leakage rate 10 mbar x l/s 2 Pressure 2 N/mm max. RoHS compliant Tooling N/A Suitable cables N/A Weight Weight 6.49 g/pce While the information has been carefully compiled to the best of our knowledge, nothing is For the installation of the intended as representation or warranty on our part and no statement herein shall be electrotechnical equipment, construed as recommendation to infringe existing patents. In the effort to improve our particular electrotechnical products, we reserve the right to make changes judged to be necessary. expertise is required. Draft Date Approved Date Rev. Engineering change number Name Date Schmid M. 08.03.07 Chr. Janen 04.11.20 e00 20-1927 S. Huber-Siegl 04.11.20 Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 2 / 2 RF 35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG