Technical Data Sheet SMA Bulkhead Jack 32RK647-302L5 Reverse Reverse Polarity All dimensions are in mm tolerances according to ISO 2768 m-H Interface According to Rosenberger SMA Reverse Compliant with FCC standard (part 15, section 15.203) Derived from IEC 60169-15, EN 122110, MIL-PRF-39012 Documents Assembly instruction 32 B21 Panel piercing B 57 Material and plating Connector parts Material Plating Center contact CuBe AuroDur, gold plated Outer contact Brass AuroDur, gold plated Body Brass AuroDur, gold plated Dielectric PTFE Gasket Silicone Crimping ferrule Copper AuroDur, gold plated Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 1 / 2 RF 35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet SMA Bulkhead Jack 32RK647-302L5 Reverse Reverse Polarity Electrical data Impedance 50 Frequency DC to 12.4 GHz VSWR 1.05 + 0.01 x f GHz Insertion loss 0.05 x dB f(GHz) 3 Insulation resistance 5 x10 M Center contact resistance 3 m Outer contact resistance 2 m Test voltage 1000 V rms Working voltage 480 V rms Power handling (at 20 C, sea level, VSWR 1.0) 200 W 2 GHz RF-leakage 100 dB up to 1 GHz - Limitations are possible due to the used cable type - Mechanical data Mating cycles min. 100 Center contact captivation: axial 27 N Coupling test torque max. 0.6 Nm Recommended torque 0.5 Nm Environmental data Temperature range -65C to +165C Thermal shock MIL-STD-202, Meth. 107, Cond. B Corrosion MIL-STD-202, Meth. 101, Cond. B Vibration MIL-STD-202, Meth. 204, Cond. D Shock MIL-STD-202, Meth. 213, Cond. I Moisture resistance MIL-STD-202, Meth. 106 RoHS compliant Tooling Crimping tool 11W150-000 Crimp insert 11W150-102 Suitable cables RG 174 A/U, RG 188 A/U, RG 316 /U Weight Weight 3.9 g/pce While the information has been carefully compiled to the best of our knowledge, nothing is For the installation of the intended as representation or warranty on our part and no statement herein shall be electrotechnical equipment, construed as recommendation to infringe existing patents. In the effort to improve our particular electrotechnical products, we reserve the right to make changes judged to be necessary. expertise is required. Draft Date Approved Date Rev. Engineering change number Name Date Rong Fang 06.04.05 Chr. Janen 11.11.20 f00 20-1927 S. Huber-Siegl 11.11.20 Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 2 / 2 RF 35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG