Technical Data Sheet Adaptor SMA 32S153-S00L5 SMA Plug N Plug All dimensions are in mm tolerances according to ISO 2768 m-H Interface According to SMA side: IEC 60169-15, EN 122110, MIL-STD-348A, Fig. 310 N side: IEC 61169-16, MIL-PRF-39012, CECC 22210 Documents N/A Material and plating Connector parts Material Plating Center contact Brass AuroDur, gold plated Outer contact SMA side CuBe or equiv. AuroDur, gold plated Outer contact N side Brass Nickel, 2.5-5 m Dielectric PTFE Gasket Silicone Coupling nut SMA side CuBe or equiv. Gold, 0.1 m Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 1 / 2 RF 35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet Adaptor SMA 32S153-S00L5 SMA Plug N Plug Electrical data Impedance 50 Frequency DC to 12 GHz VSWR 1.10, DC to 6 GHz 1.20, 6 to 12 GHz Insertion loss 0.03 x f(GHz)dB 3 Insulation resistance 5 x10 M Center contact resistance 3 m , SMA side 1 m , N side Outer contact resistance 2 m , SMA side 0.25 m , N side Test voltage 1000 V rms Working voltage 480 V rms Power handling (at 20 C, sea level, VSWR 1.0) 200 W 2 GHz RF-leakage 100 dB up to 1 GHz Mechanical data N side SMA side Mating cycles min. 500 min. 500 Coupling nut retention 450 N 270 N Center contact captivation: axial 28 N 28 N Coupling test torque max. 1.7 Nm max. 1.7 Nm Recommended torque 0.7 Nm to 1.1 Nm 0.8 Nm to 1.1 Nm Environmental data Temperature range -55C to +155C Thermal shock MIL-STD-202, Meth. 107, Cond. B Corrosion MIL-STD-202, Meth. 101, Cond. B Vibration MIL-STD-202, Meth. 204, Cond. D Shock MIL-STD-202, Meth. 213, Cond. I Moisture resistance MIL-STD-202, Meth. 106 RoHS compliant Tooling N/A Suitable cables N/A Weight Weight 29 g/pce While the information has been carefully compiled to the best of our knowledge, nothing is For the installation of the intended as representation or warranty on our part and no statement herein shall be electrotechnical equipment, construed as recommendation to infringe existing patents. In the effort to improve our particular electrotechnical products, we reserve the right to make changes judged to be necessary. expertise is required. Draft Date Approved Date Rev. Engineering change number Name Date Rong Fang 21.09.04 Chr. Janen 17.11.20 i00 20-1927 S. Huber-Siegl 17.11.20 Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 2 / 2 RF 35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG