Technical Data Sheet Adaptor SMC 39S132-S00L5 SMC Plug SMA Plug All dimensions are in mm tolerances according to ISO 2768 m-H Interface According to SMC side: IEC 60169-9, CECC 22140, US MIL-C-39012 SMA side: IEC 60169-15 EN 122110 MIL-STD-348A, Fig. 310 Documents N/A Material and plating Connector parts Material Plating Center contact CuBe AuroDur, gold plated Outer contact SMC side Brass AuroDur, gold plated Outer contact SMA side CuBe AuroDur, gold plated Dielectric PTFE Coupling nut SMA side CuBe or equiv. Gold, 0.1 m Gasket Silicone Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 1 / 2 RF 35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet Adaptor SMC 39S132-S00L5 SMC Plug SMA Plug Electrical data Impedance 50 Frequency DC to 6 GHz Return loss 35 dB, DC to 1 GHz 30 dB, 1 to 3 GHz 20 dB, 3 to 6 GHz Insertion loss 0.05 x f(G H z ) dB 3 Insulation resistance 1x10 M Center contact resistance 5 m, SMC side 3 m, SMA side Outer contact resistance 2.5 m , SMC side 2 m, SMA side Test voltage 750 V rms, 50 Hz, at sea level Working voltage 250 V rms, 50 Hz, at sea level RF-leakag 90 dB up to 1 GHz Mechanical data SMC side SMA side Mating cycles min. 500 min. 500 Coupling nut retention N/A 270 N Coupling test torque max. 0.71 Nm max. 1.7 Nm Recommended torque 0.25 Nm to 0.35 Nm 0.8 Nm to 1.1 Nm Center contact captivation: axial 10 N 10 N Environmental data Temperature range -55C to +155C Thermal shock MIL-STD-202, Meth. 107, Cond. B Vibration MIL-STD-202, Meth. 204, Cond. D Moisture resistance MIL-STD-202, Meth. 106 Corrosion MIL-STD-202, Meth. 101, Cond B Tooling N/A Suitable cables N/A Weight Weight 5.9 g/pce While the information has been carefully compiled to the best of our knowledge, nothing is For the installation of the intended as representation or warranty on our part and no statement herein shall be electrotechnical equipment, construed as recommendation to infringe existing patents. In the effort to improve our particular electrotechnical products, we reserve the right to make changes judged to be necessary. expertise is required. Draft Date Approved Date Rev. Engineering change number Name Date Inge Mhlauer 21.12.04 Chr. Janen 23.11.20 e00 20-1927 S. Huber-Siegl 23.11.20 Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.de www.rosenberger.de 2 / 2 RF 35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG