Technical Data Sheet N 50 Straight Jack 53K107-106N5 All dimensions are in mm tolerances according to ISO 2768 m-H Interface According to IEC 61169-16, MIL-PRF-39012, CECC 22210 Documents Assembly instruction 53 P Material and plating Connector parts Material Plating Center contact CuBe AuroDur, gold plated Outer contact Brass Flash white bronze over silver(e.g. Optargen) Body Brass Flash white bronze over silver(e.g. Optargen) Dielectric PTFE Crimping ferrule Copper Flash white bronze over silver(e.g. Optargen) Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.com www.rosenberger.com 1 / 2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG RFB00035/12.20/6.4 Technical Data Sheet N 50 Straight Jack 53K107-106N5 Electrical data Impedance 50 Frequency DC to 11 GHz Return loss 25 dB, DC to 2.5 GHz 20 dB, 2.5 to 6 GHz Insertion loss 0.05 dB, DC to 6 GHz 3 Insulation resistance 5 x10 M Center contact resistance 1 m Outer contact resistance 0.25 m Working voltage 500 V rms Power handling (at 20 C, sea level, VSWR 1.0) 1000 W 1 GHz 700 W 2 GHz RF-leakage 128 dB up to 1 GHz - Limitations are possible due to the used cable type - Mechanical data Mating cycles min. 500 Coupling test torque max. 1.7 Nm Recommended torque 0.7 Nm to 1.1 Nm Environmental data Temperature range -55C to +155C Thermal shock MIL-STD-202, Meth. 107, Cond. B Corrosion MIL-STD-202, Meth. 101, Cond. B Vibration MIL-STD-202, Meth. 204, Cond. B Shock MIL-STD-202, Meth. 213, Cond. I Moisture resistance MIL-STD-202, Meth. 106 RoHS compliant Tooling Crimping tool 11W150-000 Crimp insert 11W150-208 Suitable cables RG 58 C/U, RG 141/U Weight Weight 33.1 g/pce While the information has been carefully compiled to the best of our knowledge, nothing is For the installation of the intended as representation or warranty on our part and no statement herein shall be electrotechnical equipment, construed as recommendation to infringe existing patents. In the effort to improve our particular electrotechnical products, we reserve the right to make changes judged to be necessary. expertise is required. Draft Date Approved Date Rev. Engineering change number Name Date Andreas Fellner 27.06.07 Chr. Janen 22.12.20 d00 20-1927 S. Huber-Siegl 22.12.20 Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.com www.rosenberger.com 2 / 2 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG RFB00035/12.20/6.4