Technical Data Sheet STRAIGHT PLUG TNC 50 56S107-108N5 All dimensions are in mm tolerances according to ISO 2768 m-H Interface According to IEC 60169-17, MIL-PRF-39012, DIN EN 122200 Documents Assembly instruction 51 P10 Material and plating Connector parts Material Plating Center contact Brass AuroDur, gold plated Outer contact Brass Flash white bronze over silver(e.g. Optargen) Body Brass Flash white bronze over silver(e.g. Optargen) Dielectric PTFE Gasket NeopreneCR 50C6 Crimping ferrule Copper Flash white bronze over silver(e.g. Optargen) Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel. : +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany Fax : +49 8684 18-499 www.rosenberger.de Email : info rosenberger.de 1 / 2 RF 35/08.13/6.1 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet STRAIGHT PLUG TNC 50 56S107-108N5 Electrical data Impedance 50 Frequency DC to 10 GHz Return loss 30 dB, DC to 2.5 GHz 20 dB, 2.5 to 4 GHz 18 dB, 4 to 6 GHz Insertion loss 0.05 dB, DC to 6 GHz 3 Insulation resistance 5 x10 M Center contact resistance 1.5 m Outer contact resistance 1 m Test voltage 1500 V rms Working voltage 500 V rms Power handling (at 20 C, sea level, VSWR 1.0) 80 W 2 GHz - Limitations are possible due to the used cable type - Mechanical data Mating cycles 500 Center contact captivation: axial 15 N Coupling test torque 1.7 Nm Recommended torque 0.46 Nm to 0.69 Nm Environmental data Temperature range -65 C to +165 C Thermal shock MIL-STD-202, Method 107, Condition B Corrosion MIL-STD-202, Method 101, Condition B Vibration MIL-STD-202, Method 204, Condition B Shock MIL-STD-202, Method 213, Condition G Moisture resistance MIL-STD-202, Method 106 RoHS compliant Tooling Crimping tool 11W150-000 Crimp insert 11W150-208 Suitable cables RG 142 B/U, RG 223 /U, RG 400 /U Weight Weight 12.7 g/pce While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. Draft Date Approved Date Rev. Engineering change number Name Date Inge Mhlauer 10.08.04 Sa. Krautenbacher 20.03.14 f00 14-0352 T. Krojer 20.03.14 Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel. : +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany Fax : +49 8684 18-499 www.rosenberger.de Email : info rosenberger.de 2 / 2 RF 35/08.13/6.1 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG