Technical Data Sheet Receptacle MultiMag 6 M9K702-299L (Solder Cup Termination) All dimensions are in mm tolerances according to ISO 2768 m-H General Information Magnetic connector Number and type of contacts 6 rigid pins Soldering Solder cup for pre-tinned wire with cross section AWG 26 Color White, similar RAL 9010 Interface Mating with MultiMag 6 cable assembly Material and Plating Connector Parts Material Plating/Color Contacts Brass Gold plated Housing PBT GF30 White, similar RAL 9010 Magnets NdFeB Nickel plated Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel. : +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany Fax : +49 8684 18-499 www.rosenberger.de Email : info rosenberger.de 1 / 2 RF 35/05.10/6.0 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet Receptacle MultiMag 6 M9K702-299L (Solder Cup Termination) Electrical Data Designed for USB 2.0 specification 5 V DC, 0.5 A Maximum voltage 24 V DC Maximum current 1 A Mechanical Data Magnetic disengagement force average 8 N Mating cycles without load min. 5.000 Expected Mating cycles with load: Max. Voltage Max. Current Mating cycles 5.0 V DC 0.5 A min. 5.000 12.6 V DC 1.0 A min. 2.000 24.0 V DC 0.5 A min. 800 Environmental Data Temperature range -20 C to +65 C Magnets start losing their magnetic properties above 65 C Suitable Cables Pre-tinned wire with cross section AWG 26 Compliance RoHS compliant Packing Standard 100 pcs in blister Weight 1 g/pc Caution Magnets can impact the function of pace makers and implantable cardioverter- defibrillators (e.g. actuation of reed switch). Keep a minimum distance of 0.2 m (20 cm) between the magnetic connector and the implanted devices to prevent malfunction and danger to health. While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. Draft Date Approved Date Rev. Engineering change number Name Date C. Kainzmaier 27.04.15 T. Scheuerlein 23.01.20 c00 20-0163 S. Kirchhofer 23.01.20 Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel. : +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany Fax : +49 8684 18-499 www.rosenberger.de Email : info rosenberger.de 2 / 2 RF 35/05.10/6.0 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG