Technical Data Sheet WSMP RIGHT ANGLE JACK W1K201-270D3 All dimensions are in INCHES mm Interface According to Rosenberger WSMP Interface standards Documents Assembly instruction TBD Material and plating Connector parts Material Plating Center contact CuBe Gold, min. 1.27 m, over nickel Outer contact CuBe Gold, min. 1.27 m, over nickel Body CuBe Gold, min. 1.27 m, over nickel Dielectrics PTFE Cable Stop Ultem 1000 Rosenberger of North America, LLC Tel. : +1.717.859.8900 Page P.O. Box 309 Akron, PA USA 17501 Fax : +1.717.859.7044 www.rosenbergerna.com Email : info rosenbergerna.com 1 / 2 RF 35/05.10/6.0 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet WSMP RIGHT ANGLE JACK W1K201-270D3 Electrical data Impedance 50 Frequency DC to 100 GHz Return loss (typical) 26 dB, DC to 26.5 GHz 15 dB, 26.5 to 65 GHz f(GHz) Insertion loss 0.12 x dB 3 Insulation resistance 3.5 x10 M Center contact resistance 2.0 m Outer contact resistance 6.0 m Test voltage (at sea level) 250 V rms RF High Potential (at sea level) 150 V rms 5 MHz RF-leakage -80 dB (typical mated pair) - Limitations are possible due to the used cable type Mechanical data Mating cycles - Full Detent mating plug 100 - Smooth Bore mating plug 500 Engagement force (typical) - Full Detent 11 N 2.5 lbs f - Smooth Bore 5.3 N 1.2 lbs f Disengagement force (typical) - Full Detent 20 N 4.5 lbs f - Smooth Bore 4.5 N 1.0 lb f Environmental data Temperature range -55 to +165C Thermal shock MIL-STD-202, Meth. 107, Cond. B Corrosion MIL-STD-202, Meth. 101 Vibration MIL-STD-202, Meth. 204, Cond. D Shock MIL-STD-202, Meth. 213, Cond. I Moisture resistance MIL-STD-202, Meth. 106, except Step 7B 2002/95/EC (RoHS) compliant Tooling Extraction tool W1W001-000 Suitable cables UT 47 or RTK 047 or RTK-Flex 047 Packing Standard 100 pcs in a bag While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. Draft Date Approved Date Rev. Engineering change number Name Date Jac Havener 6/22/2011 Paul Czikora 6/22/2011 a00 13-s000 Paul Czikora 4/4/2013 Rosenberger of North America, LLC Tel. : +1.717.859.8900 Page P.O. Box 309 Akron, PA USA 17501 Fax : +1.717.859.7044 www.rosenbergerna.com Email : info rosenbergerna.com 2 / 2 RF 35/05.10/6.0 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG