450CXW120MEFR18X31.5 Rubycon

series 105 5000 % & () -40 *+ 105 5000 hours, Ultra Miniaturized, -40 , 105 RoHS RoHS ccoommplipliaannccee -./01 SPECIFICATIONS Item Characteristics -40 +105 Category Temperature Range 180 500Vdc Rated Voltage Range 20% 20 , 120Hz Capacitance Tolerance I=3 CV ( ( 5 V) ) (After 5 minutes application of rated voltage) I=3 CV Leakage Current (MAX) I= U A C=U F V= Vdc Leakage Current Capacitance Rated Voltage (20 , 120Hz) 180 (Vdc) 500 Rated Voltage 450 HIJKLM tan N Dissipation Factor (MAX) tan N 0.20 0.25 105 50004 3 12 %& ()*+, -./0 After applying rated voltage with rated ripple current for 5000 hours at 105 , the capacitors shall meet the following requirements. WXY Z K 20% Capacitance Change Within 20% of the initial value. Endurance HIJKLM K 200% + Dissipation Factor Not more than 200% of the specified value. + Leakage Current Not more than the specified value. (120Hz) 420 180 350, (Vdc) 5 Rated Voltage 400 500 250 Low Temperature Stability 3 5 6 7 < : 6789 Z(-25 )/Z(+20 ) Impedance Ratio (MAX) -23451 PART NUMBER CXW F x G M > = 9 ,A B(C,A 9 E6> 9 D Series Capacitance Capacitance Tolerance Option Lead Forming Case Size Rated Voltage 789: 1 - 6 -<=>1 OPTION MULTIPLIER FOR RIPPLE CURRENT EFR : PETT 9 PET Sleeve PQR (Hz) 60(50) 120 500 1k 10kO Frequency 180 350v 0.65 1.00 1.25 1.40 1.50 SR Coefficient 400 500v 0.80 1.00 1.25 1.40 1.50 %& DIMENSIONS (mm) SLEEVE(PET) d D 8 10 12.5 14.5 16 18 d 0.6 0.8 F 3.5 5.0 7.5 2.0 L+ MAX MIN MIN D+0.5MAX ()*+,- STANDARD SIZE Size DxL (mm) , Rated Ripple Current A r.m.s./105 , 120Hz Rated Voltage Capacitance Rated Voltage Capacitance RatedRipple RatedRipple Size Size (Vdc) (Vdc) Current ( F) Current 120 1040 0.53 82 1040 0.45 150 1045 0.61 100 1045 0.52 180 1050 0.69 120 1050 0.59 220 12.540 0.80 150 12.540 0.65 220 14.531.5 0.80 150 14.531.5 0.68 0.91 270 12.545 180 12.545 0.77 270 14.535 0.90 180 14.535 0.77 270 1631.5 0.92 180 1631.5 0.79 250 330 14.545 1.09 220 14.540 0.88 180 330 1635 1.04 220 1635 0.89 330 1831.5 1.03 220 1831.5 0.88 390 1640 1.17 270 1640 1.01 1835 1.14 1835 0.99 390 270 470 1645 1.31 330 1645 1.15 470 1840 1.29 330 1840 1.13 1845 1.27 560 1845 1.44 390 680 1850 1.59 470 1850 1.41 120 1040 0.54 56 1040 0.37 1045 0.43 150 1045 0.62 68 12.540 0.73 100 12.540 0.56 180 220 12.545 0.84 100 14.531.5 0.56 12.550 0.66 220 14.535 0.83 120 0.85 14.535 0.63 220 1631.5 120 270 12.550 0.94 120 1631.5 0.65 350 14.545 0.76 270 14.540 0.96 150 200 1.08 1635 0.74 330 14.545 150 1640 1.10 150 1831.5 0.74 330 1640 0.84 330 1831.5 1.02 180 1835 0.83 390 1645 1.23 180 1835 1.13 220 1650 0.99 390 1840 0.93 1650 1.37 220 470 1845 1.03 470 1840 1.29 270 1.44 560 1845 F 0.5