() - CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS (HYBRID TYPE) / series 105 10000 Load life : 105 10000 hours (Hybrid Type) AEC-Q200 RRoHSoHS complicomplianceance /SPECIFICATION Item Characteristics -55+105 Category Temperature Range 2580Vdc Rated Voltage Range 20%20 , 120Hz Capacitance Tolerance I=0.01CV3A I=0.01CV or 3A whichever is greater. (After 2 minutes) Leakage Current (MAX) I= A C= F V= Vdc Leakage Current Capacitance Rated Voltage (Vdc) 20, 120Hz 25 35 50 63 80 (tan) Rated Voltage Dissipation Factor(MAX) tan 0.14 0.12 0.10 0.09 0.08 10000 105 After applying rated voltage with rated ripple current for 10000 hours at 105, the Endurance capacitors shall meet the following Criteria. 85,85%RH 2000 After applying rated voltage for 2000 hours at 85 and humidity of 85%, the capacitors Biased Humidity shall meet the following Criteria . 30% Capacitance Change Within 30% of the initial value. 200% Dissipation Factor Not more than 200% of the specified value. Criteria 200% ESR Not more than 200% of the specified value. Leakage Current Not more than the specified value. Low Temperature Stability Z(-55)/Z(+20) 2.0 (100kHz) Z(-25)/Z(+20) 1.5 Impedance Ratio (MAX) /PART NUMBER PEV/PZE M x Lead Forming Rated Voltage Series Capacitance Capacitance Tolerance Option Case Size / /MARKING Voltage code MULTIPLIER FOR RIPPLE CURRENT No. 110 (Hz) Lot No. 100f<1k 1kf<10k 10kf<20k 68 (Vdc) Frequency 25 35 50 63 80 E EV Rated Voltage Capacitance 0.05 0.30 0.70 Coefficient Series EV,ZE E V H J K (Hz) Voltage code 20kf<50k 50kf<100k 100k Frequency Rated voltage code 0.80 0.90 1.00 Coefficient Negative 17Temperature coeffcient () / CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS (HYBRID TYPE) /DIMENSIONS 0.2 (mm) L MAX A1 D L A1 B1 C W1 P 6.3 6.1 6.6 6.6 2.7 0.5 0.8 1.8 6.3 8 6.6 6.6 2.7 0.5 0.8 1.8 8 10.5 8.3 8.3 2.9 0.8 1.1 3.1 10 10.5 10.3 10.3 3.2 0.8 1.1 4.5 0.3MAX W1 0.5MAX (mm) LAMINATED CASE d D L F d 8 9 3.5 0.6 1.5 10 9 5.0 0.6 1.5 L+MAX MIN MIN D+0.5MAX /STANDARD SIZE Size Rated Ripple Rated DL (mm) E.S.R (m/100kHz MAX) Permissible Ripple Current (mA) Capacitance Current Voltage (mArms/ (F) 20 -40 100,100kHz (Vdc) PEV 105,100kHz (SMD) PZE (LeadWire) 105,100kHz) - 56 6.36.1 50 1300 2240 2360 - 100 6.38 30 2000 3460 3640 25 220 810.5 89 27 2300 3970 4180 330 1010.5 109 20 2500 4320 4550 - 47 6.36.1 60 1300 2240 2360 68 6.38 - 35 2000 3460 3640 35 150 810.5 89 27 2300 3970 4180 270 1010.5 109 20 2500 4320 4550 - 22 6.36.1 80 1100 1900 2000 - 33 6.38 40 1600 2760 2910 50 68 810.5 89 30 1800 3110 3270 100 1010.5 109 28 2000 3460 3640 - 10 6.36.1 120 1000 1730 1820 - 22 6.38 80 1500 2590 2730 63 33 810.5 89 40 1700 2940 3090 56 1010.5 109 30 1800 3110 3270 22 810.5 89 45 1600 2760 2910 80 39 1010.5 109 35 1700 2940 3090 /TEMPERATURE COEFFICIENT FOR RIPPLE CURRENT Temperature 100 105 Area unable to continuous T() operation under ripple 1.82 current applied. Coefficient 1.82 1.73 (IMAX/Ir) 1.73 IMAX/I (I ) 0 0 Area of able to (IMAX) continuous operation under ripple current applied. Temperature coefficient IMAX/I Coefficient indica 0 100 105 ting the maximum permissible ripple current (IMAX) that can be continuously applied beyond the rated Ambient temperature current (I ). Estimated lifetime complies with our 0 lifetime calculation formula. 18 D+0.5MAX 0.2 B1 C P C F 0.5