ENGINEERING BULLETIN No.303Be CHIP ALUMINUM ELECTROLYTIC CAPACITORS TLV UPGRADE SERIES TLV FEATURES Low Impedance Life : 2000 ~ 5000 hours at 105 Surface Mount Type AEC-Q200,RoHS Compliance SPECIFICATIONS Item Characteristics Temperature Range -55~+105 Rated Voltage Range 6.3~100Vdc Capacitance Tolerance 20% 20 , 120Hz I=0.01CV after 2 minutes or 3 A (whichever is greater) Leakage Current (MAX) I= A C= F V= Vdc Leakage Current Capacitance Rated Voltage Vdc 6.3 10 16 25 35 50 63 80 100 (20 ,120Hz Rated Voltage Dissipation Factor tan 0.26 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 (MAX) When capacitance is over 1000F, tan shall be added 0.02 to the listed value with increase of every 1000F. After applying rated voltage for specified time at 105 , the capacitors shall meet the following requirements. Within 30% of the initial Capacitance Change Life Time (hrs) value. Case Size Endurance (Life) 6.3 50Vdc 63 100Vdc Not more than 200% of the Dissipation Factor specified value. D10 5000 2000 Not more than the specified Leakage Current D12.5 5000 value. Vdc 6.3 10 16 25 35 50 63 80 100 120Hz Low Temperature Rated Voltage Stability Z -25/Z20 2 2 2 2 2 2 2 2 2 Impedance Ratio Z -40/Z20 3 3 3 3 3 3 3 3 3 (MAX) Z -55/Z20 4 4 4 3 3 3 3 3 3 MULTIPLIER FOR RIPPLE CURRENT f (Hz) 120 1k 10k 100k Frequency 22 ~ 33F 0.45 0.75 0.90 1.00 Coefficient 47 ~ 180F 0.50 0.80 0.95 1.00 220 ~ 10000F 0.60 0.85 0.95 1.00 PART NUMBER TLV M DxL Rated Voltage Series Capacitance Capacitance Tolerance Option Case Size Specifications subject to change without notice. RUBYCON CORPORATION P. 1 ENGINEERING BULLETIN No.303Be CHIP ALUMINUM ELECTROLYTIC CAPACITORS TLV DIMENTIONS d L A1 B1 C W1 P K A10.2 L+ MAX 8 10.5 8.3 8.3 2.9 0.81.1 3.1 0.5Max. 0 10 10.5 10.3 10.3 3.2 0.81.1 4.5 0.5Max. 0 13 12.5 13.5 13 4.9 0.81.1 4.5 0.70.4 0.5 12.5 16 13 13 4.9 0.81.1 4.5 0.70.4 0.5 16 16.5 17 17 6 1.01.6 6.8 0.70.4 0.5 16 21.5 17 17 6 1.01.6 6.8 0.70.4 0.5 0.3MAX W1 18 16.5 19 19 7 1.01.6 6.8 0.70.4 0.5 18 21.5 19 19 7 1.01.6 6.8 0.70.4 0.5 Standard size Size DXL(mm), Rated Ripple Current(mAr.m.s./105 C,100kHz), Impedance( MAX./20100kHz) Cap Size Cap Size Vdc Ripple Impedance Vdc Ripple Impedance (F) (DL) (F) (DL) 2200 12.513.5 1100 0.065 100 810.5 350 0.34 3300 12.516 1400 0.055 150 1010.5 670 0.18 6.3 4700 1616.5 1800 0.045 220 1010.5 670 0.18 6800 1621.5 2330 0.029 330 12.513.5 900 0.12 10000 1821.5 2640 0.028 390 12.513.5 900 0.12 1000 1010.5 850 0.08 470 12.516 1200 0.1 2200 12.516 1400 0.055 470 1616.5 1610 0.075 50 10 3300 1616.5 1800 0.045 560 1616.5 1610 0.075 4700 1816.5 2060 0.044 680 1616.5 1610 0.075 6800 1821.5 2640 0.028 820 1816.5 1700 0.07 470 810.5 600 0.16 1000 1816.5 1700 0.07 680 1010.5 850 0.08 1000 1621.5 2000 0.05 1500 12.513.5 1100 0.065 1300 1621.5 2000 0.05 16 2200 1616.5 1800 0.045 1500 1821.5 2200 0.045 3300 1816.5 2060 0.044 33 810.5 250 0.65 4700 1621.5 2330 0.029 47 810.5 250 0.65 220 810.5 600 0.16 68 810.5 250 0.65 330 810.5 600 0.16 68 1010.5 400 0.35 470 1010.5 850 0.08 100 1010.5 400 0.35 25 1000 12.513.5 1100 0.065 150 12.513.5 800 0.17 63 1500 1616.5 1800 0.045 220 12.513.5 800 0.17 2200 1816.5 2060 0.044 330 12.516 1000 0.14 3300 1821.5 2640 0.028 470 1616.5 1410 0.12 100 810.5 600 0.16 680 1816.5 1690 0.11 100 1010.5 850 0.08 680 1621.5 1790 0.08 150 810.5 600 0.16 1000 1821.5 1960 0.07 220 810.5 600 0.16 330 1010.5 850 0.08 35 470 12.513.5 1100 0.065 680 12.513.5 1100 0.065 1000 1616.5 1800 0.045 1500 1816.5 2060 0.044 2200 1621.5 2330 0.029 Specifications subject to change without notice. RUBYCON CORPORATION P. 2 D+0.5MAX B1 0.2 K P C C