CL03B151KO3NNNC Samsung

(Reference sheet) SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL03B151KO3NNNC Product : Multi-layer Ceramic Capacitor Description : CAP, 150, 16V, 10%, X7R, 0201 A. Samsung Part Number 03 B 151 K O 3 N N N C CL Series Samsung Multi-layer Ceramic Capacitor Size 0201 (inch code) L: 0.6 0.03 mm W: 0.3 0.03 mm Dielectric X7R Inner electrode Ni Capacitance 150 Termination Cu Capacitance 10 % Plating Sn 100% (Pb Free) tolerance Product Normal Rated Voltage 16 V Special Reserved for future use Thickness 0.3 0.03 mm Packaging Cardboard Type, 7 reel B. Samsung Reliability Test and Judgement condition Performance Test condition Capacitance Within specified tolerance 1.00.2Vrms 110% Tan (DF) 0.035 max. Insulation Rated Voltage 60~120 sec. 10,000Mohm or 100Mohm Resistance Whichever is Smaller Appearance No abnormal exterior appearance Microscope ( 10) Withstanding No dielectric breakdown or 250% of the rated voltage Voltage mechanical breakdown Temperature X7R Characterisitcs (From -55 to 125, Capacitance change should be within 15%) Adhesive Strength No peeling shall be occur on the 200gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : within 7.5% Solder pot : 2705, 101sec. Soldering heat Tan , IR : initial spec.Performance Test condition Vibration Test Capacitance change : within 5% Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) 2hours 3 direction (x, y, z) Moisture Capacitance change : within 12.5% With rated voltage Resistance Tan : 0.05 max 402, 90~95%RH, 500+12/-0hrs IR : 500Mohm or 25Mohm Whichever is Smaller High Temperature Capacitance change : within 12.5% With 200% of the rated voltage Resistance Tan : 0.05 max Max. operating temperature IR : 1000Mohm or 50Mohm Whichever is Smaller 1000+48/-0hrs Temperature Capacitance change : within 7.5% 1 cycle condition Cycling Tan , IR : initial spec. Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) Product specifications included in the specifications are effective as of March 1, 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers.