SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL21C152JBFNNNG Product : Multi-layer Ceramic Capacitor Description : CAP, 1.5, 50V, 5%, C0G, 0805 A. Samsung Part Number 21 C 152 J B F N N N G CL Series Samsung Multi-layer Ceramic Capacitor Size 0805 (inch code) L: 2.0 0.1 mm W: 1.25 0.1 mm Dielectric C0G Inner electrode Ni Capacitance 1.5 Termination Cu Capacitance 5 Plating Sn 100% (Pb Free) % tolerance Product Normal Rated Voltage 50 V Special Reserved for future use Thickness 1.25 0.1 mm Packaging Embossed Type, 7 reel(3,000ea) B. Samsung Reliability Test and Judgement condition Performance Test condition Capacitance Within specified tolerance 0.5~5Vrms 110% Q 1000 min Insulation Rated Voltage 60~120 sec. More than 500Mohm Resistance Appearance No abnormal exterior appearance Visual inspection Withstanding No dielectric breakdown or 300% of the rated voltage Voltage mechanical breakdown Temperature C0G Characteristics (From -55 to 125, Capacitance change should be within 30PPM/) Adhesive Strength No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : within 5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : within 2.5% Solder pot : 2705, 101sec. Soldering heat Tan , IR : initial spec.Performance Test condition Vibration Test Capacitance change : within 2.5% Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) 2hours 3 direction (x, y, z) Moisture Capacitance change : within 7.5% With rated voltage Resistance Q : 200 min 402, 90~95%RH, 500 +12/-0 hours IR : More than 25 High Temperature Capacitance change : within 3% With 200% of the rated voltage Resistance Q : 350 min Max. operating temperature IR : 1000+48/-0 hours More than 50 Temperature Capacitance change : within 2.5% 1 cycle condition Cycling Tan , IR : initial spec. Min. operating temperature 25 Max. operating temperature 25 5 cycles test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.