CL21C470KBANNNC Samsung

(Reference sheet) SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL21C470KBANNNC Product : Multi-layer Ceramic Capacitor Description : CAP, 47, 50V, 10%, C0G, 0805 A. Samsung Part Number CL 21 C 470 K B A N N N C Series Samsung Multi-layer Ceramic Capacitor Size 0805 (inch code) L: 2.00 0.10 mm W: 1.25 0.10 mm C0G Ni Dielectric Inner electrode Capacitance 47 Termination Cu Capacitance 10% Plating Sn 100% (Pb Free) tolerance Product Normal Rated Voltage 50 V Special Reserved for future use Thickness 0.65 0.10 mm Packaging Cardboard Type, 7 reel B. Structure and dimension Dimension( ) Samsung P/N LW T BW CL21C470KBANNNC 2.00 0.10 1.25 0.10 0.65 0.10 0.50+0.20/-0.30C. Samsung Reliability Test and Judgement condition Judgement Test condition Capacitance Within specified tolerance 110% / 0.5~5Vrms Q 1,000 min Insulation 10,000Mohm or 500Mohm x Rated Voltage 60~120 sec. Resistance Whichever is smaller Appearance No abnormal exterior appearance Microscope (X10) 300% Withstanding No dielectric breakdown or of the rated voltage Voltage mechanical breakdown Temperature C0G Characteristics (From -55 to 125, Capacitance change should be within 30PPM/ ) Adhesive Strength No peeling shall be occur on the 500gF, for 101 sec. terminal electrode of Termination Capacitance change : Bending to the limit (1mm) Bending Strength with 1.0mm/sec. within 5% or 0.5 whichever is larger Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Solder pot : 2705, 101sec. Soldering heat within 2.5% or 0.25 whichever is larger Tan , IR : initial spec. Vibration Test Capacitance change : Amplitude : 1.5mm within 2.5% or 0.25 whichever is larger From 10 to 55 (return : 1min.) Tan , IR : initial spec. 2hours 3 direction (x, y, z) Capacitance change : With rated voltage Moisture Resistance within 7.5% or 0.75 whichever is larger 402, 90~95%RH, 500+12/-0hrs Q : 200 min IR : 500Mohm or 25Mohm Whichever is smaller High Temperature Capacitance change : With 200% of the rated voltage Resistance within 3% or 0.3 whichever is larger Max. operating temperature Q : 350 min 1,000+48/-0hrs IR : 1,000Mohm or 50Mohm Whichever is smaller Temperature Capacitance change : 1 cycle condition Cycling within 2.5% or 0.25 whichever is larger Min. operating temperature 25 Tan , IR : initial spec. Max. operating temperature 25 5 cycle test The reliability test condition can be replaced by the corresponding accelerated test condition. D. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 2605, 30sec. ) Product specifications included in the specifications are effective as of March 1, 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers.