SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL21F225ZOFNNNG Product : Multi-layer Ceramic Capacitor Descriptiont : CAP, 2.2, -20+80%, 16V, Y5V, 0805 A. Samsung Part Number 21 F 225 Z O F N N N G CL Series Samsung Multi-layer Ceramic Capacitor Size 0805 (inch code) L: 2.0 0.1 mm W: 1.25 0.1 mm Dielectric Y5V Inner electrode Ni Capacitance 2.2 Termination Cu Capacitance -20/+80 % Plating Sn 100% (Pb Free) tolerance Product Normal Rated Voltage 16 V Special Reserved for future use Thickness 1.25 0.1 mm Packaging Embossed Type, 7 reel(3,000ea) B. Samsung Reliability Test and Judgement condition Performance Test condition Capacitance Within specified tolerance 1.00.2Vrms 110% Tan (DF) 0.09 max. Insulation Rated Voltage 60~120 sec. More than 100Mohm Resistance Appearance No abnormal exterior appearance Visual inspection Withstanding No dielectric breakdown or 250% of the rated voltage Voltage mechanical breakdown Temperature Y5V Characteristics (From -30 to 85, Capacitance change should be within -82~+22%) Adhesive Strength No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : within 30% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : within 20% Solder pot : 2705, 101sec. Soldering heat Tan , IR : initial spec.Performance Test condition Vibration Test Capacitance change : within 20% Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) 2hours 3 direction (x, y, z) Moisture Capacitance change : within 30% With rated voltage Resistance Tan : 0.125 max 402, 90~95%RH, 500+12/-0 hours IR : More than 25 High Temperature Capacitance change : within 30% With 200% of the rated voltage Resistance Tan : 0.125 max Max. operating temperature IR : More than 50 1000+48/-0 hours Temperature Capacitance change : within 20% 1 cycle condition Cycling Tan , IR : initial spec. Min. operating temperature 25 Max. operating temperature 25 5 cycles test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.