CL21J106KOFN3NE Samsung

SPECIFICATION CL21J106KOFN3NE Supplier : Samsung electro-mechanics Samsung P/N : CAP, 10, 16V, 10%, JIS B, 0805 Product : Multi-layer Ceramic Capacitor Description : A. Samsung Part Number CL 21 J 106 K O F N 3 N E Series Samsung Multi-layer Ceramic Capacitor Size 0805 (inch code) L: 2.0 0.1 mm W: 1.25 0.1 mm Dielectric JIS B Inner electrode Ni Capacitance 10 Termination Cu Capacitance 10 % Plating Sn 100% (Pb Free) tolerance Product DC-Bias Improved product Rated Voltage 16 V Special Reserved for future use Thickness 1.25 0.1 mm Packaging Embossed Type, 7 reel B. Samsung Reliablility Test and Judgement condition Performance Test condition Capacitance Within specified tolerance 1.00.2Vrms 110% Tan (DF) 0.1 max. Insulation Rated Voltage 60~120 sec. 10,000Mohm or 100Mohm Resistance Whichever is Smaller Appearance No abnormal exterior appearance Microscope (10) Withstanding No dielectric breakdown or 250% of the rated voltage Voltage mechanical breakdown Temperature JIS B Characterisitcs (From -25 to 85, Capacitance change shoud be within 10%) Adhesive Strength No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : within 7.5% Solder pot : 2705, 101sec. Soldering heat Tan , IR : initial spec.Performance Test condition Vibration Test Capacitance change : within 5% Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) 2hours 3 direction (x, y, z) Moisture Capacitance change : within 12.5% With rated voltage Resistance Tan : 0.2 max 402 , 90~95%RH, 500+12/-0hrs IR : 12.5 or Over High Temperature Capacitance change : within 12.5% With 100% of the rated voltage Resistance Tan : 0.2 max Max. operating temperature IR : 25 or Over 1000+48/-0hrs Temperature Capacitance change : within 7.5% 1 cycle condition Cycling Tan , IR : initial spec. Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5 , 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.