REVISION R NOTES: ANY REV MADE TO THIS PRINT MUST HAVE AN UPDATED MKT PRINT 1. USE ASP-103597-01-B BODY FOR NON-STANDARD 19 POSITION. 2. REPRESENTS A CRITICAL DIMENSION. C 3. MAXIMUM BURR ALLOWANCE: .0005 0.013 DO NOT 4. MINIMUM PUSHOUT FORCE: .5 LB SCALE FROM 5. MAXIMUM ALLOWABLE BOW: .002 0.05 INCH/INCH AFTER ASSEMBLY. THIS PRINT C 6. CONTACT TO BE FLUSH .002 0.05 7. ONE REEL MINIMUM PLATING REQUIREMENT (85,000 CONTACTS PER REEL). 8. ALL DIMS TO BE SYMMETRICAL ABOUT THE CENTERLINE WITHIN .001 0.03 . 9. MAXIMUM VARIATION BETWEEN SOLDERBALLS: .0025 0.064 10. REFER TO VISUAL INSPECTION BOARD FOR SOLDERBALL APPEARANCE CHECKS. 11. THE DISTANCE FROM THE CENTER OF ANY SOLDERBALL TO THE CENTER OF ANY ADJACENT INNER PEG SHALL BE .025.005 0.640.13 . 12. PARTS TO BE PACKAGED IN TAPE & REEL. FOR QTY S LESS THAN 125 PCS, NO TRAILER OR LEADER WILL BE SUPPLIED. 1.732 44.00 REF 1.070 27.18 REF .970 24.64 REF C .900.002 22.860.05 ((19 POS - 1) X .0500 1.270 ) 01 .630 16.00 19 REF 5 A USER DIRECTION OF UN-REELING B POCKET NOT DETAILED C .095 2.41 .145 3.68 .320 8.13 .250 6.35 D REF REF REF E F PACKAGING VIEW SCALE 1.5:2 .035 0.89 REF .017.010 0.430.25 .309.020 7.850.51 .354 8.99 REF 4 C 2 .104 2.64 REF .139 3.54 .130.003 3.310.08 1 3 .008 0.21 (SEE NOTE 9) SECTION PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 0.3 2 ITEM NO. PART NUMBER QUANTITY MATERIAL 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 0.051 1 ASP-103597-01-B 1.0000 UL 94 V0, COLOR: BLACK WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: 2 C-140-03-H 114.00 PHOS BRONZE, 521 HARD TEMPER PLATING: VITA 42 (LEADED) SOCKET ASSEMBLY CONTACT AREA: .000030 GOLD OVER .000050 NICKEL C 3 SDB-030-6337 114.00 63% TIN /37% LEAD REMAINDER: .000003 FLASH GOLD OVER .000050 NICKEL DWG. NO. ASP-103612-01 4 K-DOT-.354-.469-.005 1.0000 POLYIMIDE FILM BY: BRYANT 10/22/2002 SHEET OF1 2 F: DWG MISC MKTG ASP-103612-01-MKT.SLDDRW 5 CT-ASP1132MS 1.0000 CONDUCTIVE POLYMERREVISION R .9000 22.860 19 01 A B .2500 6.350 C D E F NOTE: OUTER ROWS MAY NOT NEED VIAS - THIS IS LEFT TO THE DISCRETION OF THE BOARD DESIGNER900 22.86 .0250 0.635 .050 1.27 01 19 (TYP) A B .0100 0.254 C .250 6.35 TRACE D E F .050 1.27 .0250 0.635 .0310 0.787 (TYP) (TYP) FREE OF SOLDER MASK .0250 0.64 PAD RECOMMENDED STENCIL LAYOUT STENCIL TO BE .0060 0.152 THICK .0100 0.254 .0200 0.508 VIA (PLATED) PAD DETAIL SCALE 12 : 1 RECOMMENDED BOARD LAYOUT PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DESCRIPTION: SHEET SCALE: 3:1 VITA 42 (LEADED) SOCKET ASSEMBLY DWG. NO. ASP-103612-01 F: DWG MISC MKTG ASP-103612-01-MKT.SLDDRW BY: BRYANT 10/22/2002 SHEET OF2 2