NOTES: ANY REV MADE TO THIS PRINT MUST HAVE AN UPDATED MKT PRINT REVISION M 1. USE ASP-103597-01-B BODY FOR NON-STANDARD 19 POSITION. C 2. REPRESENTS A CRITICAL DIMENSION. 3. MAXIMUM BURR ALLOWANCE: .0005 0.013 630 16.00 4. MINIMUM PUSHOUT FORCE: .5 LB DO NOT REF 5. MAXIMUM ALLOWABLE BOW: .002 0.05 INCH/INCH AFTER ASSEMBLY. SCALE FROM C 6. CONTACT TO BE FLUSH .002 0.05 THIS PRINT 7. ONE REEL MINIMUM PLATING REQUIREMENT (85,000 CONTACTS PER REEL). 8. ALL DIMS TO BE SYMMETRICAL ABOUT THE CENTERLINE WITHIN .001 0.03 . 9. MAXIMUM VARIATION BETWEEN SOLDERBALLS: .0025 0.064 10. REFER TO VISUAL INSPECTION BOARD FOR SOLDERBALL APPEARANCE CHECKS. 11. THE DISTANCE FROM THE CENTER OF ANY SOLDERBALL TO THE CENTER OF ANY ADJACENT INNER PEG SHALL BE .025.005 0.640.13 . 12. PARTS TO BE PACKAGED IN TAPE & REEL. FOR QTY S LESS THAN 125 PCS, NO TRAILER OR LEADER WILL BE SUPPLIED. 13. LEAD FREE SOLDER BALLS. 1.732 44.00 REF 1.070 27.18 REF .970 24.64 REF C .900.002 22.860.05 (19 POS - 1) x .0500 1.270 19 01 A USER DIRECTION OF UN-REELING POCKET NOT DETAILED B 5 C .145 3.68 .320 8.13 .250 6.35 D REF REF E F PACKAGING VIEW .035 0.89 REF .095 2.41 REF .017.020 0.430.51 .309.020 7.850.51 C .354 8.99 .130.003 3.310.08 REF 4 2 .104 2.64 REF .135 3.44 1 3 .008 0.21 SECTION (SEE NOTE 9) PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR ITEM NO. PART NUMBER QUANTITY MATERIAL .XX: .01 0.3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 0.051 1 ASP-103597-01-B 1.0000 UL 94 V0, COLOR: BLACK WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: 2 C-140-03-H 114.00 PHOS BRONZE, 521 HARD TEMPER PLATING: VITA 42 (LEAD FREE) SOCKET ASSEMBLY CONTACT AREA: .000030 GOLD OVER .000050 NICKEL C 3 SDB-030-9653 114.00 96.5% Sn/3% Ag/.5% Cu REMAINDER: .000003 FLASH GOLD OVER .000050 NICKEL DWG. NO. ASP-103612-02 4 K-DOT-.354-.469-.005 1.0000 POLYIMIDE FILM BY: WHELAN 09/12/06 SHEET OF1 2 F: DWG MISC MKTG ASP-103612-02-MKT.SLDDRW 5 CT-ASP1132MS 1.0000 CONDUCTIVE POLYMERREVISION M .9000 22.860 19 01 A B C .2500 6.350 D E F B .0250 0.635 NOTE: OUTER ROWS MAY NOT NEED VIAS - THIS IS LEFT TO THE DISCRETION OF THE BOARD DESIGNER900 22.86 .050 1.27 (TYP) .0100 0.254 19 01 TRACE A B .0310 0.787 FREE OF SOLDER MASK C .250 6.35 45 D .0250 0.64 E PAD F .0100 0.254 .0200 0.51 VIA (PLATED) .050 1.27 .0250 0.635 PAD (TYP) (TYP) DETAIL B SCALE 10 : 1 RECOMMENDED STENCIL LAYOUT STENCIL TO BE .0060 0.152 THICK RECOMMENDED BOARD LAYOUT PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DESCRIPTION: SHEET SCALE: 4:1 VITA 42 (LEAD FREE) SOCKET ASSEMBLY DWG. NO. ASP-103612-02 BY: WHELAN 09/12/06 SHEET OF2 2 F: DWG MISC MKTG ASP-103612-02-MKT.SLDDRW