NOTES: REVISION Q 1. ASP-103597-01-B BODY FOR NON-STANDARD 19 POSITION. ANY REV MADE TO THIS PRINT MUST HAVE AN UPDATED MKT PRINT C 2. REPRESENTS A CRITICAL DIMENSION. 3. MAXIMUM BURR ALLOWANCE: .0005 0.013 4. MINIMUM PUSHOUT FORCE: .5 LB C 5. CONTACT TO BE FLUSH TO .002 0.05 TO BE MEASURED AT ALL FOUR CORNERS. 6. ONE REEL MINIMUM PLATING REQUIREMENT (85,000 CONTACTS PER REEL). 7. ALL DIMS TO BE SYMMETRICAL ABOUT THE CENTERLINE WITHIN .001 0.03 . DO NOT 8. MAXIMUM VARIATION BETWEEN SOLDERBALLS: .0025 0.064 SCALE FROM 9. REFER TO VISUAL INSPECTION BOARD FOR SOLDERBALL APPEARANCE CHECKS. THIS PRINT 10. THE DISTANCE FROM THE CENTER OF ANY SOLDERBALL TO THE CENTER OF ANY ADJACENT INNER PEG SHALL BE .025.005 0.640.13 . 11. SOLDER JOINTS TO BE INSPECTED PER IPC SPECIFICATION 12.2.12 (IPC-A-610C). 12. PARTS TO BE PACKAGED IN TAPE & REEL. FOR QTY S LESS THAN 125 PCS, NO TRAILER OR LEADER WILL BE SUPPLIED. 1.732 44.00 13. NOTE DELETED. REF 1.0700 27.178 REF .9700 24.638 REF .630 16.00 REF C .017.020 0.430.51 .9000.0020 22.8600.051 USER DIRECTION OF UN-REELING .320 8.13 REF (19 POS - 1) X .0500 1.270 19 POCKET NOT DETAILED 01 5 A B C .095 2.41 .145 3.68 .250 6.35 REF REF D E PACKAGING VIEW F .035 0.89 REF 4 .354 8.99 .308.020 7.820.51 .309 7.85 .135 3.44 SEE NOTE 5 2 C .104 2.64 REF .130.003 3.310.08 1 .008 0.21 3 SECTION (SEE NOTE 8) PROPRIETARY NOTE UNLESS OTHERWISE SPECIFIED, * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 0.3 2 ITEM NO. PART NUMBER QUANTITY MATERIAL 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 0.051 1 ASP-103597-01-B 1.0000 UL 94 V0, COLOR: BLACK WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: 2 C-226-03-H 114.00 PHOS BRONZE, 521 HARD TEMPER PLATING: VITA 42 (LEADED) SOCKET ASSEMBLY CONTACT AREA: .000030 GOLD OVER .000050 NICKEL C 3 SDB-030-6337 114.00 63% TIN /37% LEAD REMAINDER: .000003 FLASH GOLD OVER .000050 NICKEL DWG. NO. ASP-103612-05 4 K-DOT-.354-.469-.005 1.0000 POLYIMIDE FILM BY: B. COOPER 12/08/06 SHEET OF1 2 c: enterprisevault DWG MISC MKTG ASP-103612-05-MKT.SLDDRW 5 CT-ASP1132MS .00148 CONDUCTIVE POLYMERREVISION Q 01 .9000 22.860 19 A B C .2500 6.350 D E F A NOTE: .900 22.86 OUTER ROWS MAY NOT NEED VIAS - THIS IS LEFT TO THE DISCRETION OF THE BOARD DESIGNER050 1.27 (TYP) RECOMMENDED BOARD LAYOUT 19 01 A .0250 0.635 B C .250 6.35 D E F .0100 0.254 .050 1.27 .0250 0.635 TRACE (TYP) (TYP) .0310 0.787 RECOMMENDED STENCIL LAYOUT FREE OF SOLDER MASK STENCIL TO BE .0060 0.152 THICK 45 .0250 0.635 PAD .0200 0.508 .0100 0.254 PAD VIA (PLATED) DETAIL A SCALE 12 : 1 PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DESCRIPTION: SHEET SCALE: 3:1 VITA 42 (LEADED) SOCKET ASSEMBLY DWG. NO. ASP-103612-05 BY: B. COOPER 12/08/06 SHEET OF2 2 c: enterprisevault DWG MISC MKTG ASP-103612-05-MKT.SLDDRW