CLP-1XX-XX-XXX-D-XX REVISION CT 1. C REPRESENTS A CRITICAL DIMENSION 2. MINIMUM PUSHOUT FORCE: .5LB (8 OZ) 3. ONE POSITON WILL BE LOST FOR EVERY CUT MADE ON A No OF POSITIONS PER ROW OPTION SOCKET STRIP -02 THRU -50 -P: PICK & PLACE PAD (USE LMP-01) 4. TUBE PACKAGE POSITIONS 5-50 ONLY. POSITIONS 2-4 ARE (AVAILABLE ON POSITON -05 THRU -50 ONLY) DO NOT TO BE PLACED IN ANTISTATIC BUBBLE BAGS P/N ASBBLT4X5.5. (NOT AVAILABLE WITH -PA OR -K OPTIONS) SCALE FROM 5. SHEAR TAILS TO DIMENSIONS SHOWN LEAD STYLE SPEC (SEE FIG 3, SHT 2) THIS PRINT C 6. PARTS TO BE SYMMETRICAL ABOUT WITHIN .0015 0.038 . -A: ALIGNMENT PIN (USE CLP-XX-D-XX) L -02: SURFACE MOUNT (NOT AVAILABLE WITH -PA OPTION) 7. ENDWALL AFTER CUTTING: .0185 0.470 .0025 0.064 (USE C-106-X2-XXX) (SEE FIG 3, SHT 2) 8. VOID CORES MAY NOT BE PRESENT. (SEE NOTE 9) -TR: TAPE AND REEL 9. HAND FILL USE C-106-01-XX. -BE: BOTTOM ENTRY ONLY (USE CLP-XX-DBE-XX) AUTOMATION USE C-106-22-XX. C-106-02-XX CAN BE -PA: PICK & PLACE PAD WITH ALIGNMENT PINS C SUBBED FOR C-106-22-XX. (NOT AVAILABLE WITH -P, -A, OR -K OPTIONS) C 10. MAX CUT FLASH: .010 0.27 WITH NO FLASH ALLOWED IN .0100 0.254 (SEE SHT 2, TABLE 3)(SEE NOTE 12) HOLES OR EXTENDING BELOW LEADS. -K: POLYIMIDE FILM PAD (AVAILABLE ON -05 THRU -50 C 11. MAX BURR: .005 .13 005 0.12 POSITIONS. USE K-DOT-.157-.250-.005, (SEE FIG 5, SHT 2) 12. ALL -PA OPTION PARTS SHIP IN EIA-960 TRAYS. (NOT AVAILABLE WITH -P OR -PA OPTIONS) C BODY SPEC -D: DOUBLE ROW (USE CLP-XX-D) PLATING SPEC DETAIL D -F: 3 FLASH SELECTIVE GOLD IN CONTACT AREA MATTE TIN ON TAIL SCALE 16 : 1 -L: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA No OF POS x .0500 1.270 ) - .0500 1.270 MATTE TIN ON TAIL (TOLERANCE ACCUM .0020 0.051 ) -S: 30 SELECTIVE GOLD IN CONTACT AREA MATTE TIN ON TAIL C -G: 10 GOLD IN CONTACT AREA .034 0.85 (No OF POS X .0500 1.270 ) + .017 0.43 .008 0.20 3 ON TAIL REF (SEE NOTE 3 AND 7) -H: 30 HEAVY GOLD IN CONTACT AREA 3 ON TAIL -LM: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA D 02 MATTE TIN ON TAIL -FM: 3 FLASH SELECTIVE GOLD IN CONTACT AREA MATTE TIN ON TAIL .120 3.05 -SM: 30 SELECTIVE GOLD IN CONTACT AREA REF MATTE TIN ON TAIL -LTL: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA 01 TIN/LEAD (90/10+/-5%) TAIL -D -D-BE CLP-XX-D-XX CLP-XX-DBE-XX C .050 1.27 REF +.003 +0.08 .090 2.29 -.001 -0.03 (MEASURE AT BEND) 4 .084 2.12 REF -A- .004 0.10 POS. 02-35 .006 0.15 POS. 36-50 C C L L SECTION -D -D-BE .170.010 4.310.25 3 (-D-BE BODY: CLP-XX-DBE-XX) (DIFFERENT AS SHOWN, .016 0.41 x .005 0.13 REF SECTION OTHERWISE SAME AS -D BODY) (-D BODY: CLP-XX-D-XX) 2.5 MAX SWAY (TYP) PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND C C-106-22-XXX DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: 88 AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, .010 0.25 REF DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE 90 .012 0.30 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 .051 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: -D -D-BE LOW PROFILE .050 x .050 DOUBLE ROW ASM DWG. NO. INSULATOR: LCP, UL 94 VO, COLOR: BLACK IN-PROCESS FIG 1 CONTACT: PHOS BRONZE CLP-1XX-XX-XXX-D-XX SCALE 8:1 BY: PURVIS 01/31/1994 SHEET OF1 3 F: DWG MISC MKTG CLP-1XX-XX-XXX-D-XX-MKT.SLDDRWAVAILABLE ON POSITIONS 05 THRU 50 ONLY REVISION CT NOTE: = USED MEASURED DIMENSION (REF) = - .250 6.35 )/2 .020 0.51 C (SEE NOTE) C 3.45 .100 2.54 (SEE NOTE) .005 X 45 REF (TYP 4 SIDES) .019 0.47 (No OF POS x .0500 1.270 ) - .100 2.54 22.86 LMP-01 .250 6.35 REF FIG 2 FIG 3 .0070 0.178 -A: ALIGNMENT PIN -P: PICK AND PLACE PAD REF (TYP) .025 0.6350 REF (TYP) (3 POSITION MINIMUM) (AVAILABLE ON POSITION 05 THRU 50 ONLY) .0100 0.254 REF (TYP) (NOT AVAILABLE WITH -PA OPTION) (NOT AVAILABLE WITH -PA OR -K OPTIONS) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) .0050 0.127 REF (TYP) C .121 3.07 .051 1.30 C (SEE NOTE) .019.020 0.480.51 .035 0.89 REF .325 8.26 REF .095 2.41 C C .275 6.99 (SEE NOTE) PPP-38-X-X-XX .1575.0050 4.0000.127 FIG 5 FIG 4 -K: POLYIMIDE FILM PAD -PA: PICK & PLACE PAD WITH ALIGNMENT PINS (AVAILABLE ON POSITION 05 THRU 50 ONLY) (NOT AVAILABLE WITH -P, -A OR -K OPTIONS) (NOT AVAILABLE WITH -P OR -PA OPTIONS) NOTE: = USED MEASURED DIMENSION (REF) = - .1575 4.000 )/2 .020 0.51 PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DESCRIPTION: DO NOT SCALE DRAWING LOW PROFILE .050 x .050 DOUBLE ROW ASM DWG. NO. SHEET SCALE: 4:1 CLP-1XX-XX-XXX-D-XX F: DWG MISC MKTG CLP-1XX-XX-XXX-D-XX-MKT.SLDDRW BY: PURVIS 01/31/1994 SHEET OF2 3