PATENT NUMBERS REVISION CK 5713755 5961339 CLT-1XX-02-XX-D-XX DO NOT OPTION No OF POS. PER ROW SCALE FROM -P: PICK & PLACE PAD -02 THRU -50 THIS PRINT AVAILABLE ON POSITIONS 04 THRU 50 ONLY LEAD STYLE FIG 6 (SEE FIG. 2, SHT 2. USE LMP-03) -02: SURFACE MOUNT (SEE NOTE 11) -TR: TAPE AND REEL PACKAGING -BE OPTION (SEE TABLE 1) (02 THRU 36 POS ONLY) (SAME AS FIG 1 EXCEPT INSULATOR) -BE: BOTTOM ENTRY PLATING SPECIFICATION (SEE FIG. 6, USE CLT-XX-DBE-XX) -F: 3 SELECTIVE GOLD IN CONTACT AREA, -A: ALIGNMENT PIN (MOLDED OR STAKED) MATTE TIN ON TAIL (SEE FIGS. 3 & 4, SHT 2) -L: 10 SELECTIVE GOLD IN CONTACT AREA, C (No OF POS x .0787 2.00 ) .008 0.20 (STAKED MIN 5 POS) SEE TABLE 1 MATTE TIN ON TAIL (MOLDED MIN 3 POS) (CUT TO POSITION) SEE NOTE 4, 9, 10 -G: 10 GOLD IN CONTACT AREA, -K: POLYIMIDE FILM PAD (No OF POS x .07874 2.00 ) - .07874 2.00 REF .1575 4.00 REF 3 GOLD ON TAIL (AVAILABLE ON POS. 4 THRU 50 ONLY) -S: 30 SELECTIVE GOLD IN CONTACT AREA, (SEE FIG 5, SHT 2) MATTE TIN ON TAIL (USE K-DOT-.197-.344-.005) .07874 2.00 REF -H: 30 GOLD IN CONTACT AREA, 3 GOLD ON TAIL -FM: 3 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL C -LM: 10 SELECTIVE GOLD IN CONTACT AREA, L ROW SPEC. MATTE TIN ON TAIL -D DOUBLE ROW -SM: 30 SELECTIVE GOLD IN CONTACT AREA, (USE CLT-XX-D EXCEPT MATTE TIN ON TAIL FOR -BE OPTION) C (SEE NOTE 10) BURR SIDE (SEE NOTE 8) 2.5 MAX SWAY .024 0.61 SQ REF (ANY DIRECTION) .0200 0.51 x .0050 .127 REF C L 4 .0835 2.12 .090.002 2.270.05 C REF (MEASURE AT BEND) SEE NOTE 2 CLT-XX-D-XX .0130.0015 0.3300.038 C 3 C FIG 1 .203.010 5.1500.254 (SEE NOTE 6) DETAIL C SECTION SCALE 4 : 1 SCALE 16 : 1 B C SEE NOTE 12 C .086.004 2.1840.102 .295.008 7.4940.203 .002 .051 NOTES: MIN IN-PROCESS 2 DETAIL B 1. C REPRESENTS A CRITICAL DIMENSION. IN-PROCESS 1 (HANDFILL ONLY) 2. COPLANARITY TO BE .004 FOR POSITIONS 2-25, SCALE 16 : 1 (HANDFILL ONLY) .006 FOR POSITIONS 26-34, AND .008 FOR 35-50. PROPRIETARY NOTE * * 3. MINIMUM PUSHOUT FORCE: .4 LB. UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND 4. WILL LOSE A POSITION FOR EVERY CUT MADE ON A SOCKET STRIP. DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS 5. ALL OPTIONS:PACKAGE POSITIONS -04 THRU -50 IN TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, 88 C PT-CLX002-D TUBE AS SHOWN IN VIEWS, WITH TWO TP-12 PLUGS DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE 90 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR PER TUBE. LAYER PACKAGE POSITIONS -02 & -03XX: .01 0.3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY 6. SHEAR TAILS TO DIMENSION SHOWNXXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 0.051 C e-Mail info SAMTEC.com code 55322 7. PARTS TO BE SYMMETRICAL ABOUT WRITTEN CONSENT OF SAMTEC, INC. L 8. MAXIMUM BURR: .005 0.13 DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: .010 0.25 C 9. MAXIMUM CUT FLASH: .010 0.25 WITH NO FLASH MATERIAL: 2MM LOW PROFILE SOCKET STRIP .012 0.30 ALLOWED IN HOLES OR EXTENDING BELOW LEADS INSULATOR: LCP, UL 94 VO, COLOR BLACK DWG. NO. 10. MINIMUM STANDARD BODY ENDWALL AFTER CUTTING: .0215 0.546 IN-PROCESS 11. -BE BODY ENDWALL AFTER CUTTING: .0169 .003 0.429 0.08 CLT-1XX-02-XX-D-XX CONTACT: PHOS BRONZE SCALE 8:1 12. C-114-02 CAN BE USED FOR C-114-22. C-114-22-XX IS FOR (AUTOMATED ONLY) AUTOMATED ASSEMBLY PROCESSES ONLY. SHEET OF BY: BRATCHER 10/03/1994 1 2 F: DWG MISC MKTG CLT-1XX-02-XX-D-XX-MKT.SLDDR REVISION CK (SEE NOTE) (NO OF POS x .07874 2.00 ) / 2 C -.1125 2.858 .020 0.51 C (SEE NOTE) .202 5.13 REF .225 5.72 .020.020 0.500.51 LMP-03 C C L L .098 2.477 .197 5.00 REF C L FIG 2 -P: PICK & PLACE PAD (4 POS MIN) .095 2.400 NOTE: = USED MEASURED DIMENSION (REF) = ( - .1969 5.00 ) / 2) .020 0.51 C C FIG 5 ((No OF POS -2) x .0787 2.00 ) .030 0.762 REF -K OPTION (4 POS MIN) .035 0.889 SM-A7H USE TP-12 PLUGS C L .025 0.64 REF 3 MAX SWAY CLT-XX-D(-BE*) (ANY DIRECTION) FIG 3 -A OPTION (STAKED) -P OPTION W/O -A OPTION ALL OPTIONS EXCEPT -P (5 POS MIN) OPTION W/O -A OPTION = FOR -BE OPTION ONLY * POSITIONS 04 - 50 PACKAGING VIEWS (SEE NOTE 5) PT-CLX002-D CLT-XX-D(-BE ) * .025 0.64 REF PROPRIETARY NOTE * * .0235 0.597 REF (No OF POS - 2) x .0787 2.00 REF THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, C MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. = FOR -BE OPTION ONLY FIG 4 DESCRIPTION: -A OPTION (MOLDED) * DO NOT SCALE DRAWING 2MM LOW PROFILE SOCKET STRIP (3 POS MIN) DWG. NO. SHEET SCALE: 4:1 CLT-1XX-02-XX-D-XX F: DWG MISC MKTG CLT-1XX-02-XX-D-XX-MKT.SLDDRW SHEET OF BY: BRATCHER 10/03/1994 2 2