COST-EFFECTIVE & DUAL WIPE SOCKETS 8 Gbps (2.00 mm) .0787 PITCH TLE/CLT SERIES TLE NO. PINS PLATING OPTION Mates: TLE 1 01 DV - PER ROW - - OPTION - - TMMH, TMM, MTMM, MMT, TW, LTMM, ZLTMM, TCMD, TSH 02 thru 50 G A = 10 (0.25 m) = Alignment Pin Gold (3 positions minimum) CLT Mates: K TMM, TMMH, MTMM, = (5.00 mm) .197 DIA MMT, TW, TSH Polyimide Film Pick & Place Pad No. of positions x (3 positions minimum) (2.00) .0787 SPECIFICATIONS P = Metal Pick & Place Pad (4.00) TLE (4 positions minimum) .157 Insulator Material: Black Liquid Crystal Polymer TR Contact Material: = Tape & Reel Packaging A Option Phosphor Bronze (2-37 positions only) Plating: Au over 50 (1.27 m) Ni -FR Current Rating (TLE/TMMH): = Full Reel Tape & Reel (4.32) 3.2 A per pin (4.50) (must order maximum .170 (2 pins powered) .177 quantity per reel contact Operating Temp Range: P Option Samtec for quantity breaks) -55 C to +125 C (5.51) (2-37 positions only) Insertion Depth: .217 (2.08 mm) .082 to (4.37 mm) .172 with (0.38 mm) .015 wipe, pass-through, or (3.35 mm) .132 min for bottom entry NO. PINS LEAD PLATING OTHER CLT 1 D - PER ROW - STYLE - OPTION - - OPTIONS CLT Same as TLE except: Plating: Sn or Au over 50 (1.27 m) Ni All options require 02 thru 50 01 F Current Rating (TMMH/CLT): Style 02 = Through- = Gold flash 4.1 A per pin hole on contact, (2 pins powered) BE Matte Tin on tail Insertion Depth: = Bottom Entry Top Entry= 02 (Required for bottom (1.40 mm) .055 minimum = Surface L entry applications) Bottom Entry= Mount = 10 (0.25 m) (2.57 mm) .101 minimum ALSO AVAILABLE Gold on contact, (add board thickness for A Matte Tin on tail 03 correct post OAL) = Alignment Pin Other Platings = Through- Max Cycles: (3 positions minimum) (MOQ Required) hole G 100 with 10 (0.25 m) Au Metal or plastic at = 10 (0.25 m) No. of positions x Samtecs discretion Gold on contact, (2.00) .0787 Gold flash on tail PROCESSING K = (5.00 mm) .197 DIA (4.00) Polyimide Film TLE .157 Pick & Place Pad LeadFree Solderable: (04 thru 50 only) Yes SMT Lead Coplanarity: (2.121) (0.10 mm) .004 max (02-26) P .0835 (0.15 mm) .006 max (27-50)* = Pick & Place Pad *(.004 stencil solution (4 positions minimum) (2.29) may be available contact (Not always necessary .090 ipg samtec.com) for auto placement.) (5.16) A CLT A Option .203 Same as TLE except: (3.02) TR 02 SMT Lead Coplanarity: .119 = Tape & Reel (0.10 mm) .004 max (02-25) (36 positions max) 01 or 03 (0.15 mm) .006 max (26-34)* (0.20 mm) .008 max (35-50)* FR *(.004 stencil solution = Full Reel Tape & Reel LEAD STYLE A may be available contact (must order maximum P Option ipg samtec.com) quantity per reel 01 (2.16) .085 contact Samtec for Note: 03 (2.95) .116 quantity breaks) Some lengths, styles and (36 positions max) options are non-standard, non-returnable. F-221 (Rev 01OCT21) samtec.com TLE or samtec.com CLT Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Board to Board & Mezzanine Connectors category: Click to view products by Samtec manufacturer: Other Similar products are found below : 589158040000018 MDF7C-18P-2.54DSA(55) FCN-230C068-11 FCN-268F012-G/BD FCN-268F036-G/BD FCN-268M012-G/0D FCN- 268M024-G/1D FCN-723J004/1 MIS-048-01-F-D-DP-K 832-10-034-10-001000 FX4C-80S-1.27DSA FCN-214Q030-G/0 FCN-234P048-G/0 FCN-235D050-G/C 210-93-314-41-105000 2-22603-0 MDF7-40DP-2.54DSA(55) AXG720047 5031084030 MIT-114-03-F-D-K 55323- 1519 DF33-2P-3.3DSA(24) YFT-20-05-H-03-SB-K 503308-3040 026-6203-PDB 027-6203-PDB 069159702701000 10123981-102LF 101A10019X 55650-0588-C 68684-306 75140-7012 589159005003045 194261-1 FCN-268F024-G0D 10124054-515LF 68685-603 8- 1616154-3 MIS-019-01-F-D 589159005002045 541371078 IL-WX-10PB-HF-B-E1000E FCN-268M024-G/3D 20021832-06016C1LF KX15-20KLDL-E1000E MDF7-16DP-2.54DSA(55) AXE810124 FCN-214J100-G/0 FCN-230C068-E/S AXE812124