SHROUDED IDC HEADERS (2.00 mm) .0787 PITCH ETMM/EHT/EC2 SERIES ETMM TYPE NO. PINS PLATING TAIL OTHER 1 02 D Mates: STRIP - PER ROW - - OPTION - - OPTION - OPTION TCSD, TCMD EHT ETMM 05, 08, 10, F TH XX Mates: = Mates with = Gold Flash =Through- = Polarized Position 12, 13, 15, TCSD and on post, hole TCSD 17, 20, 22, 25 TCMD with Matte Tin LC (Standard sizes) Strain Relief on tail RA = Locking Clip SPECIFICATIONS = Right (N/A with RA) L -angle (Manual placement Insulator Material: = 10 required) Black Liquid Crystal Polymer (0.25 m) SM Terminal Material: Gold on post, = Surface K Phosphor Bronze Matte Tin Mount = (7.50 mm) .295 Plating: on tail DIA Polyimide Film Sn or Au over Pick & Place Pad 50 (1.27 m) Ni (SM only) Operating Temp Range: (6.54) .257 -55 C to +125 C TR = Tape & Reel (SM only) TH SM RA PROCESSING RA FR No. of positions x (2.00) .0787 + (9.97) .393 LeadFree Solderable: = Full Reel Yes Tape & Reel SMT Lead Coplanarity: (must order max. EHT = (0.10 mm) .004 max quantity per reel ETMM = (0.13 mm) .005 max* contact Samtec for *(.004 stencil solution quantity breaks) may be available contact SM (SM only) ipg samtec.com) TH NO. PINS PLATING TAIL OTHER EHT 1 01 D - PER ROW - - OPTION - - OPTION - OPTION Leave 05, 08, F XX blank for = Gold flash on post, = Polarized Position 10, 12, Through-hole EJECTOR HEADER CAP Matte Tin on tail (Locks TCSD cable to EHT header) 13, 15, SR RA 17, 20, L = Strain Relief = Right-angle = 10 (0.25 m) (Leave Blank for 22, 25 (9.65) Gold on post, no strain relief) .380 SM Matte Tin on tail = Surface LC Mount = Locking Clip (9.65) (SM only) No. of positions x (2.00) .0787 .380 (Manual placement + (13.79) .543 required) No. of positions x (2.00) .0787 + (19.89) .783 K (7.62) = (7.50 mm) .295 DIA .300 NO. PINS PER ROW EC2 Polyimide Film Pick & Place Pad (SM only) 05, 08, 10, 12, 13, SM P 15, 17, 20, 22, 25 = Pick & Place Pad (SM only) TR = Tape & Reel (15.07) (12.19) (SM only) .593 .480 FR = Full Reel Tape & Reel (must order max. quantity SR per reel contact Samtec Note: for quantity breaks) Some lengths, styles and RA (SM only) options are non-standard, (Latch removed for clarity) non-returnable. F-221 (Rev 28MAR21) samtec.com ETMM or samtec.com EHT Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Headers & Wire Housings category: Click to view products by Samtec manufacturer: Other Similar products are found below : 892-18-020-10-001101 58102-G61-06LF 582553-1 0009485154 009176003701906 0050291907 LY20-4P-DT1-P1E-BR 02.125.8002.8 609-3404 61062-3 61082-181009 622-3653LF 63453-116 636-1030 636-1427 636-3427 636-4007 641938-9 641991-4 644827-2 65817- 010LF 65817-015LF 65863-015LF 66207-023LF 67095-007LF 67601157 68645-018 68648-049 70.362.1628.0 70-4210 70-4226B 70- 4853B 707-5020 707-5028 71.350.2428.0 71918-208LF 71961-016LF 733-134 733-162 754199-000 760-3052 787-8014-00 79531-3000 FCN-360C032-B FCN-367T-T012/H FCN-723D010/2 80.063.4001.1 800-90-001-10-001000 800-90-010-10-002000 801-43-002-10-013000