Q STRIP COAX 14 Gbps CABLE ASSEMBLIES (0.50 mm) .0197 & (0.80 mm) .0315 PITCH HQCD/EQCD SERIES HQCD NO. OF POSITIONS WIRE END END WIRING END SERIES Mates: - PER ROW - LENGTH - NO. 1 - NO. 2 - OPTION - OPTIONS QTH, QSH Leave blank for Specify EQCD HQCD 030, 060, 090 XX.XX 1 no Screw Mount END = (0.50 mm) (HQCD Series) = Wire Length = Pin 1 to Mates: & Retention .0197 pitch in Inches ASSEMBLIES Pin 1 QTE, QSE End Option (43.7 mm) from chart 020, 040, 060 01.72 EQCD (EQCD Series) 2 F minimum = (0.80 mm) = Pin 1 to = Screw Mount SPECIFICATIONS .0315 pitch Pin 2 End No. 1 only (Not available Cable: 3 with XPX 38 AWG micro coax ribbon = Pin 1 to options) Signal Routing: Second to OAL = Wire Length + (24.13) .950 50 W Single-Ended Last Pin S Overall Length: = Screw Mount (95.3 mm) 03.75 to 4 End No. 2 only (1 m) 40 standard Wire Length (1.27) .050 = Pin 1 to Cable Flexing Life: Last Pin >10,000 cycles B Cable Bending Radius: = Screw Mount <2.5mm Both Ends Plating: (Not available Au over 50 (1.27 m) Ni with XPX Current Rating: options) EQCD = 500 mA per pin HQCD = 300 mA per pin 1 (6 adjacent pins powered) = End No. 1 Cable Propagation Delay: Screw Mount. 4.79 nsec/meter End No. 2 Operating Temp Range: Retention Pin -25 C to +105 C or Socket Unmating Force (-RT1 option): -RT1 option increases 2 unmating force up to 50% END NO. 1 END NO. 2 = End No. 1 (STL SHOWN) (STR SHOWN) Retention Pin or Socket. End No. 2 Screw Mount Option END 1 or EDGE MOUNT END 2 Terminal, Edge Mount, Notch Up TEU TED Terminal, Edge Mount, Notch Down END 1 or SURFACE MOUNT SEU Socket, Edge Mount, Notch Up END 2 SED Socket, Edge Mount, Notch Down TTR Terminal, Top Mount, Notch Right TTL Terminal, Top Mount, Notch Left END1 PANEL MOUNT ONLY TBR Terminal, Bottom Mount, Notch Right TPU Terminal, Panel Mount, Notch Up TBL Terminal, Bottom Mount, Notch Left Notes: Cable lengths longer than STR Socket, Top Mount, Notch Right 40.00 (1 meter) are not TPD Terminal, Panel Mount, Notch Down supported with S.I. test data. STL Socket, Top Mount, Notch Left Design your full cable SPU Socket, Panel Mount, Notch Up assembly with Samtecs SBR Socket, Bottom Mount, Notch Right High-Speed Cable Builder at www.samtec.com/cablebuilder SPD Socket, Panel Mount, Notch Down SBL Socket, Bottom Mount, Notch Left This Series is non-standard, non-returnable. F-221 (Rev 17MAR21) samtec.com HQCD or samtec.com EQCD Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Coaxial Cables category: Click to view products by Samtec manufacturer: Other Similar products are found below : 89880-003-1000 CY2389-000 8221-010-U1000 9116-010-U500 1322R-010-1000 1807A-B59-U1000 2020K8421-9X-CS3417 9251-010- 1000 9275-010-U1000 935240-000 980704-001 CF2823-000 33312-010-500 CZ1589-000 5022W0809-0CS3263 10610-4-4 EF8108-000 1673B TIN100 672525-001 144517-000 735A1-008-1000 8212-010-U500 480414-000 7915A 009U1000 5024A1311-0 1281S5 010250 1530A 010U1000 9248 010U1000 9244 0101000 1694A 0081000 1190A 0101000 8241F J5C1000 1674A TIN50 7915A 0091000 TRCH- 50-2 9066 0031000 7805R 008100 1674A TIN100 9116SB 0101000 9271 0061000 1613A 0101000 1807A B591000 5339Q5 009U500 539945 0091000 9116R 0101000 89207 010100 9058 0101000 8241A 0101000 DA7805R 0101000 C6424