F-215 (Rev 03FEB16) HQDP02006.00SEUTTR2F EQDP02806.00STRTTL3F (0.50 mm) .0197 (HQDP) (0.80 mm) .0315 (EQDP) HQDP, EQDP SERIES Q PAIRS TWINAX CABLE ASSEMBLIES EQDP Mates with: SPECIFICATIONS QTE-DP, QSE-DP Differential Pair For complete speci cations routing HQDP Mates with: see www.samtec.com EQDP QTH-DP, QSH-DP or www.samtec.com HQDP Cable: 30 AWG twinax micro ribbon Note: Cable lengths longer Signal Routing: than 40.00 (1 meter) are not 100 Differential Surface supported with S.I. test data. Cable Bending Radius: Mount or (3.18 mm) 1/8 min Note: Design your High Speed Plating: Edge Mount 30 AWG Cable with Samtecs High Au over 50 (1.27 m) Ni twinax Speed Cable Solutionator at Current Rating: www.samtec.com/hdr EQDP = 500 mA per pin ribbon cable HQDP = 800 mA per pin (6 adjacent pins powered) Propagation Delay: 4.67 nsec/meter Rated 7dB Insertion Loss Cable Operating Temp Range: Length EQDP HQDP -25 C to +105 C Skew (pair-to-pair): 10 (0.25 m) 10.00 GHz / 20.00 Gbps 9.50 GHz / 19.00 Gbps Optional Captive Screw or <10 ps/ft Socket or Performance data for other cable lengths and complete Screw Mount Option Skew (within a pair): test data available at www.samtec.com HQDP or Terminal <5 ps/ft www.samtec.com EQDP or contact sig samtec.com EMI Performance: FCC Class A RoHS Compliant: Yes END NO. OF WIRE END WIRING SCREW RECOGNITIONS TYPE NO. 1 PAIRS LENGTH NO. 2 OPTION OPTION For complete scope of recognitions see www.samtec.com/quality Leave Specify 1 020, blank for = Pin 1 to END no Screw 040, 060 HQDP XX.XX Pin 1 ASSEMBLIES Option (20 pairs per bank) = (0.50 mm) = Wire Length ALSO AVAILABLE HQDP Series from chart .0197 pitch in Inches 2 (MOV Required) F (43.7 mm) 01.72 = Pin 1 to = End 014, 028, minimum EQDP Pin 2 Pairs No. 1 = (0.80 mm) END SURFACE MOUNT 042, 056 Terminations .0315 pitch (14 pairs per bank) 3 Terminal, Top, S Contact Samtec. TTR EQDP Series Notch Right = Pin 1 to = End Second Terminal, Top, No. 2 TTL Last Pin Notch Left Terminal, Bottom, OAL = Wire Length + (20.32) .800 (3.81) .150 B TBR Notch Right 4 = Both Wire Length (1.27) .050 = Pin 1 to Terminal, Bottom, Ends TBL Last Pin Notch Left Socket, Top, STR Notch Right Socket, Top, STL WIRING REQUIREMENTS Notch Left WIRING Socket, Bottom, END OPTIONS SBR OPTION Notch Right TTR, TBL, STL, Socket, Bottom, SBR, TEU, SED to TTR, SBL Notch Left 1 or 2 TBL, STL, SBR, TED, SEU or EDGE MOUNT TTL, TBR, STR, END (HQDP only) SBL, TED, SEU to TTL, TBR, STR, SBL, TEU, SED Terminal, Edge, END NO. 1 TEU Notch Up (TEU SHOWN) TTR, TBL, STL, Terminal, Edge, END NO. 2 TED SBR, TEU, SED to TTL, Notch Down (TTR SHOWN) TBR, STR, SBL, TEU, SED Socket, Edge, 3 or 4 or SEU Notch Up TTL, TBR, STR, SBL, TED, SEU to TTR, Socket, Edge, SED TBL, STL, SBR, TED, SEU Notch Down Note: This Series is non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice. SAS SATA Fibre Channel Ethernet PCIe InfiniBand Download test report at www.samtec.com HQDP or www.samtec.com EQDP Protocols SupportedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for D-Sub Micro-D Connectors category: Click to view products by Samtec manufacturer: Other Similar products are found below : 003626 025-1227-000 0685610016 0688014147 0688014227 07190-SP036 0745461602 0751341000 0795762102 0797580009 0834249014 0836129020 0836129024 0836199011 0887329200 0897613412 0923150410 0923150615 0923151609 0923171036 094- 0116-2007 094-6135-0000 094-6136-0000 094-6235-0000 094-6335-0000 094-6435-0000 094-6535-0000 094-6635-0000 094-6636-0000 094-6735-0000 094-6935-0000 094-6936-0000 095-0605-2053 095-0607-2055 095479-0007 095480-0011 096510-0306 09651226803 096513-0002 096516-0222 098-9027-0029 10090930-P150ALF 100RC21SCBR1 100RC31SCBRP2 100RC37PC6P1 100RN31P-C6PT2 10114-3000PE 10114-6000EC 10114-6000EL 10120-3000PE