ET60S-D06-3-08-000-S-VP-S Samtec

EXTREME HIGH-POWER 60 A SYSTEMS FEATURES & BENEFITS Up to 60 A per power blade (2 blades powered) Low 10 mm profile (right-angle) for enhanced system airflow Power only, or power/signal combinations 3 or 5 signal rows in the same form factor AC power, DC power, power/signal combinations and split power options available Coplanar and perpendicular applications Modules can be configured to accommodate most any design MAX Rugged guide posts are standard top design for board space savings 60 Amps Press-fit (ET60S only) and hot swap (ET60T only) options available Standard Creepage* 3.02 mm Standard Clearance* 1.87 mm *Selectively loading contacts achieves customer specific creepage and clearance requrements. Contact asp samtec.com KEY SPECIFICATIONS INSULATOR TERMINAL OPERATING VOLTAGE MATING LEAD-FREE PITCH PLATING MATERIAL MATERIAL TEMP RANGE RATING CYCLES SOLDERABLE (5.50 mm) .217 Power Signal: Phosphor (7.50 mm) .295 Au or Sn over -40 C to Black LCP Bronze 280 VAC 500 Yes 50 (1.27 m) Ni +105 C (2.00 mm) .097 (5 row) Power: Copper Alloy Signal (2.54 mm) .100 (3 row) Notes: Some lengths, styles and options are non-standard, non-returnable. *EXTreme Ten60Power is a trademark of Molex Incorporated and is dual sourced by Molex samtec.com/extreme-ten60power Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.60 A SIGNAL/POWER COMBO SYSTEM POWER SIGNAL POS. POWER GUIDE SERIES ROWS PLATING TAIL OPTION - - - - - - - - OPTION (R) PER ROW OPTION (L) POST (Required (Leave blank ET60T AXX 0 00 AXX L VP callout) for no hot Terminal = AC Power = No = No Signal = AC Power = 10 (0.25 m) = Vertical Press-fit swap) Positions Signal Positions Gold on contact, (02 - 06) (02 - 06) Matte Tin on tail S ET60S 08 V1 (Not available = Side H Socket 3 = 3 Row only = Vertical for 5 rows) Guide Post = Hot Swap DXX DXX through-hole (ET60T only) = DC Power = DC Power (Use with (1.60 mm) 5 01, 02, Positions Positions S .062 thick card) T* 03, 04, (02 - 10) (02 - 10) = 30 (0 and 3 Row only) = Top (0.76 m) Gold on Guide Post 05, 06, contact, Matte tin SXX* SXX* R1 07, 08 on tail = Split Power = Split Power = Right-angle = 5 Row only through-hole (Use with (1.60 mm) 000 000 .062 thick card) = No Power = No Power (required for ET60T) ET60T Board Mates: ET60S (29.25) 1.152 (77.21) 3.04 (10.00) .394 (77.21) 3.04 ET60T-D04-5-03-A04-X-R1-S SHOWN View complete specifications at: samtec.com ET60T ET60S (18.00) .709 Board Mates: ET60T (77.21) 3.04 VERTICAL ET60S-D04-5-03-A04-X-VP-S SHOWN (77.21) 3.04 (10.00) .394 (25.22) .993 RIGHT-ANGLE ET60S-D04-5-03-A04-X-R1-S SHOWN View complete specifications at: samtec.com ET60S F - 2 21 samtec.com/extreme-ten60power Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice. (10.00) .394 (77.21) 3.04 (25.22) .993 *PRELIMINARY