LOW-PROFILE AND ELEVATED ONE-PIECE (1.00 mm) .0394 PITCH FSI SERIES SPECIFICATIONS PINS BODY PLATING ROW INSERT ALIGNMENT OTHER FSI 1 - PER ROW - HEIGHT - OPTION - OPTION - OPTION - OPTION - OPTION Insulator Material: Liquid Crystal Polymer Contact Material: Leave blank Leave blank BeCu 10, 20, 03 G S WT for Short for no Current Rating: = 3 mm = 10 = Single = Weld Tab 30, 50 Version Alignment Pin 2.8 A per pin (0.25 m) Row (Available (Insert/Screw (No screw (2 pins powered) Gold (Available with S row 06 Option) down AD Operating Temp Range: (03 only) with 5, 10 option & 06 = 6 mm inserts or = Alignment Pin -55 C to +125 C & 20 pins & 10 body holes) 05, Top & Bottom Plating: with AD height only) L 10 Au over 50 (1.27 m) Ni alignment 10, 20, = 10 = 10 mm E pin) (0.25 m) K 30, 50 = 2-56 x Gold on = Polyimide (Short 1/16 screw PROCESSING contact, D Film Pick & Version) thread Matte Tin = Double Place Pad Lead-Free Solderable: on tail Row (50 position M Yes (Not with threaded = 2.00 mm SMT Lead Coplanarity: available insert option x 0.40 mm (0.10 mm) .004 max (05-30) with only) screw thread (0.15 mm) .006 max (50)* 03 body *(.004 stencil solution height) P may be available contact = Plastic Pick IPG samtec.com) (No. of positions x & Place Pad Compression Board: (1.00) .03937) + (5.08 mm) (0.76) .030 Gold Pads required (8.22) .200 x .324 (12.45 mm) .490 (50 not available B with E) (No. of positions x (1.00) .03937) + (14.10) .555 OTHER (Not available with S SOLUTIONS 06 & 10 Insert Option (10, 20 & 30 pins/row) row option Contact Detail or 03 body Low height) Profile (72.09) 2.838 TR See www.samtec.com SEI = Tape & Reel A .050 FR (1.27 mm) 03AD = Full Reel Short Version Pitch Shown Tape & Reel Insert Option (50 pins/row) See www.samtec.com SIBF (must order Double Row Version 03, 06, 10 max. quantity per reel contact Samtec for quantity breaks) (71.20) 2.803 ALSO AVAILABLE MOQ Required BODY A B No alignment pin HEIGHT Top side alignment pin 03 (3.00) .118 (8.76) .345 Insert Option (50 pins/row) Bottom side alignment pin (No. of positions x (1.00) .03937) + 06 (6.00) .236 (9.02) .355 Other platings (5.00).197 10 (10.00) .394 (9.02) .355 (4.60) (5.30) .181 .209 03, 06 & 10 Contact Detail Notes: A Applications requiring 40-50 positions without threaded inserts, please contact A Samtec Interconnect (No. of positions x (1.00) .03937) Processing Group. + (14.70) .579 Short Version 03AD Shown WT Option Insert Option (10, 20 & 30 pins/row) Some lengths, styles and (06 & 10 Body only) options are non-standard, Single Row Version 03, 06, 10 non-returnable. F-221 samtec.com FSI Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Board to Board & Mezzanine Connectors category: Click to view products by Samtec manufacturer: Other Similar products are found below : 589158040000018 MDF7C-18P-2.54DSA(55) FCN-230C068-11 FCN-268F012-G/BD FCN-268F036-G/BD FCN-268M012-G/0D FCN- 268M024-G/1D FCN-723J004/1 MIS-048-01-F-D-DP-K 832-10-034-10-001000 FX4C-80S-1.27DSA FCN-214Q030-G/0 FCN-234P048-G/0 FCN-235D050-G/C 210-93-314-41-105000 2-22603-0 MDF7-40DP-2.54DSA(55) AXG720047 5031084030 MIT-114-03-F-D-K 55323- 1519 DF33-2P-3.3DSA(24) YFT-20-05-H-03-SB-K 503308-3040 026-6203-PDB 027-6203-PDB 069159702701000 10123981-102LF 101A10019X 55650-0588-C 68684-306 75140-7012 589159005003045 194261-1 FCN-268F024-G0D 10124054-515LF 68685-603 8- 1616154-3 MIS-019-01-F-D 589159005002045 541371078 IL-WX-10PB-HF-B-E1000E FCN-268M024-G/3D 20021832-06016C1LF KX15-20KLDL-E1000E MDF7-16DP-2.54DSA(55) AXE810124 FCN-214J100-G/0 FCN-230C068-E/S AXE812124