F-215 FTM12502LDV FTMH11602LDVP FTMH11102FDVESA (1,00 mm) .0394 SMT MICRO TERMINAL STRIPS Mates with: SPECIFICATIONS CLM, MLE Optional For complete speci cations and Pick & Place rec om mend ed PCB layouts pads see www.samtec.com FTMH or www.samtec.com FTM Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Current Rating (FTMH/CLM): 2.8 A per pin (1 pin powered per row) Operating Temp Range: -55C to +125C Plating: Sn or Au over 50 (1,27 m) Ni Low pro le RoHS Compliant: (1,79 mm) Yes .071 Surface Processing: Lead-Free Solderable: Mount Yes -DV Lead Coplanarity: (0,10 mm) .004 max -DH Lead Coplanarity: (0,10 mm) .004 max (05-25) (0,15 mm) .006 max (26-50) TYPE LEAD PLATING NO. PINS 1 STRIP STYLE OPTION PER ROW RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality FTMH 02 F = 05 thru 50 = (1,91 mm) .075 Post = Gold ash on post, FTMH (Mates with MLE) Matte Tin on tail = SMT Micro FTM L 03 = 02 thru 50 (unshrouded) FTM = 10 (0,25 m) ALSO AVAILABLE = 05 thru 46 (shrouded) = (1,65 mm) .065 Post = Micro Low Pro le Gold on post, Matte Tin on tail (MOQ Required) (Mates with CLM) End shrouds with board locks FTMH No. of positions (1,91) Molded end shrouds for OPTION B x (1,00) .03937 .075 02 100 05 through 08 positions DIA (1,57) ES .062 Other platings (3,10) (4,32) (4,06) (3,17) .122 .170 EC Contact Samtec160 .125 (5,49) EP .216 (3,84) (1,22) 01 99 .151 FTMH .048 FTMH No. of positions LEAD x (1,00) .03937 + B A ES OPTION EP OPTION STYLE (1,91) EC OPTION 02 .075 (3,18) (1,65) 03 .065 .125 X (5,08) .200 (1,00) A (5,00) (0,30) .012 SQ TYP .03937 .197 (3,18) .125 A (0,69) .027 (1,49) (1,80) .059 .071 (2,59) (5,21) (0,64) .025 .102 P OPTION .205 Shrouded option removed for clarity DIA DV OPTION DH OPTION A OPTION Note: Some lengths, styles and options are non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.FTMH12803LDVEP FTMH12202FDVEC FTMH13502FDH FTMH12002LDV FTM12502LDV FTMH, FTM SERIES Low Pro le (1,27 mm) .050 Surface mount Shrouded and alignment pin Flex Shroud options available options available ROW OTHER FLEX SHROUD OPTIONS OPTION OPTIONS (FTMH-DV only with (FTM only) DV A 9 pins/row minimum) = Dual Vertical = Alignment Pin S (3 positions minimum) ES = End Shroud Metal or plastic at Samtec discretion DH = End Shroud (05 positions minimum). (FTMHDV only) = Dual Horizontal Molded or press t shroud at (FTMH only) Samtecs discretion EC K (See assembly print at = End Shroud with Locking Clip = (2,50 mm) .098 DIA Polyimide www.samtec.com FTM (Manual placement required) Film Pick & Place Pad for dimensions) (FTMHDH only) 02 50 EP = End Shroud with Guide Post SA P (Use only when mating with CLM) (3,18) = End Shroud with Alignment Pins (5,21) = Plastic Pick & Place Pad .205 .125 (05 through 46 positions) (DV only) (6 positions minimum FTMH) 01 49 (7 positions minimum FTM) FTM FTM OPTION C No. of positions x TR (1,00) .03937 + C (7,00) FTM = Tape & Reel S 02 46 .276 LEAD D (4,00) STYLE SA .157 (1,91) (3,23) (4,44) 02 .075 .127 .175 (2,54) (1,65) 03 .100 .065 x 01 45 (5,08) .200 (0,30) .012 SQ TYP (1,27) (0,97) (3,18) .038 .050 (3,56) (1,40) (3,56) D .125 .140 .055 .140 No of positions (1,00) S OPTION P OPTION x (1,00) .03937 DV OPTION .039 DIA (1,50) .059 Shrouded options removed for clarity SA OPTION WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.