FTR-114-01-S-S-TR Samtec

SMT MICRO HEADER & SOCKET (1.27 mm) .050 PITCH FTR/RSM SERIES FTR NO. PINS LEAD PLATING ROW OPTION FTR 1 Mates: - PER ROW - STYLE - OPTION - OPTION - RSM, SMS, SLM RSM Specify 02 thru 40 L S XX LEAD Mates: = 10 (0.25 m) = Single Row = Polarized STYLE Gold on post, FTR, HTMS, HDWM, Matte Tin on tail from D A DWM, TML, ZML, TMS chart = Double Row = Alignment Pin G (5 positions min. for D) = 10 (0.25 m) (Metal or plastic SPECIFICATIONS Gold on post, LEAD at Samtec discretion) A Gold flash on tail STYLE (Not available with -LC) Insulator Material: (1.27) .050 x 01 (5.84) .230 Black Liquid Crystal Polymer No. of Positions LC Contact Material: 02 (2.54) .100 = Locking Clip RSM: Phosphor Bronze (2.48) 03 (3.18) .125 (6 positions min. for D) Terminal Material: .098 (Not available with -A) FTR: Phosphor Bronze 51 (4.83) .190 (Manual placement required) Plating: 52 (5.21) .205 Au or Sn over 50 (1.27 m) Ni P 53 (7.24) .285 Current Rating (FTR/RSM): = Plastic Pick & Place Pad 54 (8.51) .335 3.1 A per pin (5 positions min. for D) (4.98) (2 pins powered) 55 (9.91) .390 (8 positions min. for S) .196 Operating Temp Range: 56 (10.29) .405 FTR: -55 C to +105 C with Tin TR FTR: -55 C to +125 C with Gold 57 (10.92) .430 = Tape & Reel RSM: -55 C to +125 C (4 positions min. for S) Lead Size Accepted: RSM: (0.46 mm) .018 SQ FR Insertion Depth: A = Full Reel Tape & Reel RSM: Top Entry = (must order max. quantity (2.64 mm) .104 to (5.84 mm) .230 per reel contact Samtec (2.54) with (0.38 mm) .015 wipe, or for quantity breaks) .100 pass-through. (4 positions min. for S) RSM: Bottom Entry = (5.49 mm) .216 minimum S D (Add board thickness for A LC correct post OAL) PROCESSING Lead-Free Solderable: NO. PINS PLATING ROW OPTION RSM 1 02 Yes - PER ROW - - OPTION - OPTION - SMT Lead Coplanarity: RSM: (0.10 mm) .004 max FTR: (0.10 mm) .004 max (02-20) FTR: (0.15 mm) .006 max (21- 02 thru 36 L S K 40)* = 10 (0.25 m) = Single Row = (6.25 mm) .246 DIA *(.004 stencil solution Gold on contact, Polyimide film may be available contact Matte Tin on tail Pick & Place Pad D IPG samtec.com) (5 positions (1.27) .050 x No. = Double Row minimum for D) of Positions + (0.25) .010 (7 positions minimum for S) (2.54) .100 P = Plastic Pick & Place Pad (5 positions ALSO AVAILABLE minimum for D) MOQ Required (6 positions minimum for S) (5.08) Other platings .200 Locking clips TR = Tape & Reel FR = Full Reel Tape & Reel (must order max. (6.10) quantity per reel .240 contact Samtec for Note: quantity breaks) Some lengths, styles and S D options are non-standard, non-returnable. F-221 samtec.com FTR or samtec.com RSM Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Headers & Wire Housings category: Click to view products by Samtec manufacturer: Other Similar products are found below : 892-18-020-10-001101 58102-G61-06LF 582553-1 0009485154 009176003701906 0050291907 LY20-4P-DT1-P1E-BR 02.125.8002.8 609-3404 61062-3 61082-181009 622-3653LF 63453-116 636-1030 636-1427 636-3427 636-4007 641938-9 641991-4 644827-2 65817- 010LF 65817-015LF 65863-015LF 66207-023LF 67095-007LF 67601157 68645-018 68648-049 70.362.1628.0 70-4210 70-4226B 70- 4853B 707-5020 707-5028 71.350.2428.0 71918-208LF 71961-016LF 733-134 733-162 754199-000 760-3052 79531-3000 FCN- 360C032-B FCN-367T-T012/H FCN-723D010/2 80.063.4001.1 800-90-010-10-002000 801-43-002-10-013000 801-43-006-10-002000 801-93-011-10-001000