FTSH-105-01-F-D-RA Samtec

THROUGH-HOLE MICRO HEADER 8 Gbps (1.27 mm) .050 PITCH FTSH SERIES FTSH NO. PINS LEAD PLATING TAIL OTHER 1 OPTION FTSH D Board Mates: - PER ROW - STYLE - OPTION - - - OPTION- OPTIONS CLP, FLE Cable Mates: Leave blank for Leave Specify 02 F ES FFSD, FFTP RIght-angle blank for LEAD = Gold flash = End Shroud thru straight STYLE on post, (Style 02 & 03) tail 50 XXX Matte Tin 9 pins/row from SPECIFICATIONS = Polarized on tail minimum chart Position RA Insulator Material: (Specify = Right- L EP Black Liquid Crystal Polymer position angle = 10 = End Shroud Terminal Material: of omitted pin) (0.25 m) with Guide Post Phosphor Bronze (Not available Gold on (Style 02 & 03) Plating: with -EX post, 9 pins/row Sn or Au over 50 (1.27 m) Ni options) Matte Tin minimum Current Rating (FTSH/CLP): on tail 3.4 A per pin (2 pins powered) EL Operating Temp Range: = End Shroud -55 C to +125 C with Board Lock (Style 02 & 03) 9 pins/row PROCESSING minimum Lead-Free Solderable: EJ Yes = Ejector Shroud OPTION Z No. of positions x (1.27) .050 + Z (Style 01 only) 10 pins/row ES (1.55) .061 minimum (4.78) 25 pins/row EJ (15.77) .621 .188 maximum RA EP (5.87) .231 not available LOCKING CLIP EL ((6.53) .257 EX OPTION SHOWN K FFSD STRIP ASSEMBLY = Keying Shroud For single LOCKING for mating mating CLIP with FFSD cycle (Style 01 only, with the No. of positions x (1.27) .050 05, 08, 10, 13, PC FFSD. BOARD 15, 17, 20 & 25 Specify pins/row only (3.43) -LC after tail option. and 13, 17, .135 20 & 25 only Lead Style -01 and with EJ option) 10 pins/row minimum. 5-9 pins/row not available in combination with keying LEAD MATES A shroud (-K). STYLE WITH (3.05) A A 01 FFSD .120 (2.51) (1.91) ALSO AVAILABLE 02 FLE .099 .075 MOQ Required (1.65) 03 CLP-D Molded Pick & Place pads .065 Other platings (3.81) RA 04 N/A .150 10 YEAR MFG WITH 30 GOLD EXTENDED LIFE PRODUCT HIGH MATING CYCLES Notes: Some sizes, styles and options are non-standard, non-returnable. RA ES ES EP EL EJ K See SFM/TFM for positive alignment feature. F-221 samtec.com FTSH Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Headers & Wire Housings category: Click to view products by Samtec manufacturer: Other Similar products are found below : 892-18-020-10-001101 58102-G61-06LF 582553-1 0009485154 009176003701906 0050291907 LY20-4P-DT1-P1E-BR 02.125.8002.8 609-3404 61062-3 61082-181009 622-3653LF 63453-116 636-1030 636-1427 636-3427 636-4007 641938-9 641991-4 644827-2 65817- 010LF 65817-015LF 65863-015LF 66207-023LF 67095-007LF 67601157 68645-018 68648-049 70.362.1628.0 70-4210 70-4226B 70- 4853B 707-5020 707-5028 71.350.2428.0 71918-208LF 71961-016LF 733-134 733-162 754199-000 760-3052 787-8014-00 79531-3000 FCN-360C032-B FCN-367T-T012/H FCN-723D010/2 80.063.4001.1 800-90-001-10-001000 800-90-010-10-002000 801-43-002-10-013000