FTSH-107-01-F-DV-TR Samtec

F-219 (Rev 02NOV18) FTSH11201LMT 10 YEAR MFG WITH 30 GOLD EXTENDED LIFE PRODUCT HIGH MATING FTSH12501LDVEJ CYCLES FTSH12001FDV (1.27 mm) .050 SMT MICRO HEADER Board Mates: SPECIFICATIONS APPLICATIONS OTHER SOLUTIONS CLP, FLE For complete specifications and Cable Mates: recommended PCB layouts FTSH CLP FFSD, FFTP see www.samtec.com FTSH Insulator Material: OPTIONS Black Liquid Crystal Polymer (1.27 mm) .050 Terminal Material: P OPTION HORIZONTAL ES OPTION Phosphor Bronze Plating: Sn or Au over 50 (1.27 m) Ni EC OPTION Current Rating (FTSH/CLP): 3.4 A per pin (2 pins powered) Operating Temp Range: -55 C to +125 C RoHS Compliant: Yes EP OPTION PROCESSING Ultra-low profile option available. End Shrouds available. Lead-Free Solderable: Call for FTS Series specifications. Yes SMT Lead Coplanarity: MT & DV Tail Option: EJ OPTION (0.10 mm) .004 max (02-25) EL OPTION TR OPTION MT & DH Tail Option: (0.15 mm) .006 max (26-50)* *(.004 stencil solution may be available contact NO. PINS LEAD 1 FTSH IPG samtec.com) PER ROW STYLE RECOGNITIONS For complete scope of recognitions see 01 www.samtec.com/quality = (3.05 mm) .120 Post (Mates with FFSD, CLPDH) 02 thru 50 FILE NO. E111594 02 (5.33) A = (1.91 mm) .075 Post .210 ALSO AVAILABLE No. of positions x (1.27) .050 + Z (Mates with FLE) (MOQ Required) 100 02 (0.81) (0.51) 03 .032 .020 Molded Pick & Place pads (4.78) = (1.65 mm) .065 Post (2.29) .188 (Mates with CLPD) Latches .090 (1.27) DH Other platings 01 99 .050 (Styles 01, 02, 04 only) 04 EX OPTION SHOWN = (3.81 mm) .150 Post OPTION Z No. of positions x (1.27) .050 + Z 05 (2.57) = (4.32 mm) .170 Post ES .101 (Mates with CLPBE) (15.77) EJ (5.64) .621 .222 (3.33) EC .131 (5.87) EP LEAD .231 EJ OPTION SHOWN A STYLE (6.53) EL (3.05) .257 01 .120 (1.91) (0.40) 02 .075 No. of positions x (1.27) .050 .016 A (5.08) (1.65) SQ 03 .200 .065 (3.81) A 04 .150 (4.32) (2.51) Notes: (2.92) 05 .170 .099 Some sizes, styles and .115 (1.27) options are non-standard, (1.27) .050 (0.81) (5.84) (2.29) .050 non-returnable032 .230 .090 MT See SFM/TFM for positive DV (Styles 01, 02 & 04 only) alignment feature. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.FTSH15002LDVEP FTSH11302LDHC FTSH11702LDV FTSH11203LDVEPP FTSH11004FDV FTSH SERIES SMT MICRO HEADER Optional guide post (2.92 mm) .115 Optional end shrouds and (1.27 mm) .050 Surface mount ejector shrouds micro pitch PLATING TAIL OTHER FLEX SHROUD OPTION OPTION OPTION OPTIONS OPTIONS Leave Blank (Style 02 & 03 only, DH & MT not available) K F DV for -DH & -MT 9 pins/row minimum = Keying Shroud = Gold flash = Double (Other positions available. Call Samtec.) (For mating with FFSD on post, Vertical Style 01 only and Matte Tin XXX 05, 08, 10, 13, 17, 20 & 25 on tail = Polarized DH pins/row only. 13, 17, 20 & 25 ES EL Position = Double pins/row only with EJ option) L = End Shroud = End Shroud with Board Lock (Specify Horizontal (DV only) = 10 (Boards are positively locked position of (Styles (0.25 m) and cannot be unmated) omitted pin) 01, 02 & EC Gold on post, 04 only) (Not available A = End Shroud Matte Tin with -EX = Alignment Pin with Locking Clip EJ on tail options) = Ejector Shroud (DV 3 positions min.) (Manual placement MT (Style 01 only) (DH 5 positions min.) required) = Mixed DH & MT not available (Metal or plastic at Technology 10 pins/row minimum Samtec discretion) (Styles EP 25 pins/row maximum 01, 02 & = End Shroud (1.91) 04 only) C .075 with Guide Post DIA = (5.00 mm) .197 DIA (3.05) Polyimide film .120 Pick & Place Pad (DH only) (4.83) .190 (0.89) P .035 DIA = Pick & Place Pad (0.86) ES EP A .034 (DV 4 positions min.) (DH & MT not available) (1.17) (3.30) .046 .130 (2.16) (5.08) TR x .085 .200 = Tape & Reel Packaging (3.05) (5.08) .120 .200 (Flex Shroud options not (11.18) (3.20) (4.10) available except ES & EJ) .440 .126 .160 (1.22) (4.83) (2.29) .048 .190 .090 EJ K P EL EC Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.