F-215 (Rev 19OCT15) HCMD10S03.0001 (2.54 mm) .100 IDC SOCKET & TERMINAL CABLE Mates with: ROW TYPE NO. PINS END ASSEMBLED TSW, MTSW, TST, EW, OPTION BST, ZST, MTLW, TSM, STRIP PER ROW ASSEMBLY LENGTH EJH-02 (HCSD only) SPECIFICATIONS S XX.XX 05, 08, For complete speci cations and = Single = Assembled Length recommended PCB layouts 10, 12, see www.samtec.com HCSD or www.samtec.com HCSS Assembled Length in D 13, 15, INCHES (1/8 ) = Double HCSD, HCSS 2 inches minimum 17, 20, (Color coded cable N/A Insulator Material: for 36 pins/row. Black Liquid Crystal Polymer 25, 36 Flammability Rating: See G option.) UL 94V-O Insulation Resistance: 5000 M Temperature Range: -20C to +105C (Rainbow Cable) HCM -40C to +105C (Gray Cable) = Male Strip Withstanding Voltage: = Single End S 1000 VRMS 60 Hz Contact: Phosphor Bronze (3.30) (5.08) Plating: 10 (0.25 m) Au on No. of Positions x .100 (2.54) .130 .200 contact area, 150 (3.81 m) + .180 (4.57) Sn on balance over 50 (1.27 m) Ni. Contact Resistance: (7.87) 10 m .310 Lead Size Range: REF .024 (0.61 mm) SQ to .026 (0.66 mm) SQ Lead Insertion Depth: .185 (4.70 mm) to (0.51) .250 (6.35 mm) Socket or Male Plug on one end .020 A Insertion Force: 6 oz (1.67 N) average with (0.64) .025 (0.64 mm) SQ probe = Double End D (2.54) .025 (2.54) Withdrawal Force: Single .100 SQ .100 3 oz (0.83 N) average with (HCMS) TYP Double .025 (0.64 mm) SQ probe (HCMD) Wire: 28 AWG 7/36 stranded LEAD Tinned Copper A STYLE RoHS Compliant: Yes 01 (3.05) .120 (5.84) .230 SPECIFICATIONS 02 For complete speci cations and recommended PCB layouts see www.samtec.com HCMD HCS or www.samtec.com HCMS = Socket Strip HCMD, HCMS Insulator Material: Black Liquid Crystal Polymer Flammability Rating: Socket or Male Plug on each end UL 94V-O No. of Positions x .100 (2.54) Insulation Resistance: (5.08) (3.30) + .180 (4.57) 5000 M .200 .130 Temperature Range: = Transfer End T -55C to +80C Withstanding Voltage: 1000 VRMS 60 Hz (9.53) Terminal: Phosphor Bronze .375 Plating: REF Sn over 50 (1.27 m) Ni Wire: 28 AWG 7/36 stranded Tinned Copper (0.76) (2.54) RoHS Compliant: Yes (2.54) .030 .100 .100 SQ. TYP. Single Double (HCSS) (HCSD) Note: Male Plug on one end with socket on other. IDC assemblies are Begin part number with HCM. non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.HCSS15S03.0001G HCSD10S03.0001TG HCMD, HCMS, HCSD, HCSS SERIES LEAD PLATING OTHER NOTCH STYLE OPTION OPTIONS POLARIZATION = Notch Polarization N 02 (1.27) 01 .050 S = HCSS/HCSD or = 10 (0.25 m) Gold on contact area or tail, 01 (3.05 mm) .120 tail for Tin on balance HCMS/HCMD (Standard on HCSS & HCSD. Leave blank) (3.81) .150 Required for HCSS and HCSD. 02 T (Not available on HCMS or HCMD, = (5.84 mm) .230 tail = Tin unless Transfer, then only the HCMS/HCMD only (Standard on HCMS & HCMD. Leave blank) socket is polarized.) P XX ST X S XX R = Position Polarization = Stripped & Tinned = Daisy Chain Single = Reversed (50.80) Specify Suf x from table. All 2.00 1 XX / (3.18) 1 8 dimensions are /16 (1,59 mm). Not min. available in 28 positions and higher. Single Row Connectors 01 02 01 02 Outer Most 03 04 03 (End of 04 Assembly) (101.60) 4.00 minimum 7 1 When mating double row connector ST8 /8 (3.18) 1 with two single row connectors, the ST4 /4 (6.35) Single Double M outer most single will be connected 1 ST2 /2 (12.70) = Middle Reversed to Conductor 1 and the inside single 3 ST3 /8 (9.53) to Conductor 2. 6 Specify XX as position. For Double 3 the same position will be polarized D XX on both ends. (Not available on = Daisy Chain, Double HCM, unless Transfer, then only the B XX socket is polarized) = Breakout (50.80) 2.00 1 XX / (3.18) 8 min. Specify XX as number of Double Row Requires SXX, WXX or DXX conductors to be broken out. Strips 7 Outer Most (End of 1 Assembly) XX O = Outside Reversed (101.60) (127.00) 4.00 minimum G 6 5.00 max. Breakout starts with Number 1 = Gray Cable (50.80) lead indicated by brown wire or 2.00 min. red stripe. Shown on top side. 4 W XX = Wiring Reversed Daisy Chain, Single RW = Reversed Wiring Standard cable is color coded. Specify G for Gray cable with one red edge. Same as S XX except outer strip connected to conductor 2 and inside Requires SXX, WXX or DXX strip connected to conductor 1. 1 wire opposite position 1 2 5 6 7 WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.