F-219 HCMD10S03.0001 (2.54 mm) .100 IDC SOCKET & TERMINAL CABLE Mates with: TYPE ROW NO. PINS END ASSEMBLED TSW, MTSW, TST, EW, STRIP OPTION PER ROW ASSEMBLY LENGTH BST, ZST, MTLW, TSM, EJH-02 (HCSD only) SPECIFICATIONS S XX.XX 05, 08, For complete specifications and = Single = Assembled Length recommended PCB layouts 10, 12, see www.samtec.com HCSD or www.samtec.com HCSS Assembled Length in D 13, 15, INCHES (1/8 ) = Double HCSD, HCSS 2 inches minimum 17, 20 (Color coded cable N/A Insulator Material: for 36 pins/row. Black Liquid Crystal Polymer Flammability Rating: See G option.) UL 94V-O Insulation Resistance: 5000 M Temperature Range: -20 C to +105 C (Rainbow Cable) HCM -40 C to +105 C (Gray Cable) = Male Strip Withstanding Voltage: = Single End S 1000 VRMS 60 Hz Contact: (3.30) (5.08) Phosphor Bronze No. of Positions x .100 (2.54) .130 .200 Plating: + .180 (4.57) 10 (0.25 m) Au on contact area, 150 (3.81 m) Sn on balance over (7.87) 50 (1.27 m) Ni. .310 Lead Size Range: REF .024 (0.61 mm) SQ to .026 (0.66 mm) SQ Lead Insertion Depth: .185 (4.70 mm) to (0.51) .250 (6.35 mm) Socket or Male Plug on one end A .020 Wire: 28 AWG 7/36 stranded (0.64) Tinned Copper = Double End D (2.54) .025 (2.54) RoHS Compliant: Single .100 SQ .100 Yes (HCMS) TYP Double (HCMD) SPECIFICATIONS LEAD A STYLE For complete specifications and 01 (3.05) .120 recommended PCB layouts see www.samtec.com HCMD (5.84) .230 02 or www.samtec.com HCMS HCMD, HCMS Insulator Material: HCS Black Liquid Crystal Polymer = Socket Strip Flammability Rating: UL 94V-O Insulation Resistance: 5000 M Temperature Range: Socket or Male Plug on each end -20 C to +105 C No. of Positions x .100 (2.54) (Rainbow Cable) (5.08) (3.30) + .180 (4.57) .200 -40 C to +105 C (Gray Cable) .130 Withstanding Voltage: = Transfer End T 1000 VRMS 60 Hz Terminal: Phosphor Bronze (9.53) Plating: .375 Sn over 50 (1.27 m) Ni REF Wire: 28 AWG 7/36 stranded Tinned Copper (0.76) (2.54) (2.54) RoHS Compliant: .030 .100 .100 Yes SQ. TYP. Single Double (HCSS) (HCSD) Note: Male Plug on one end with socket on other. IDC assemblies are Begin part number with HCM. non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.HCSS15S03.0001G HCSD10S03.0001TG HCMD, HCMS, HCSD, HCSS SERIES IDC SOCKET & TERMINAL CABLE LEAD OTHER PLATING NOTCH STYLE OPTIONS OPTION POLARIZATION = Notch Polarization N 02 (1.27) .050 01 S = HCSS/HCSD or = 10 (0.25 m) Gold on contact area or tail, 01 (3.05 mm) .120 tail for Tin on balance HCMS/HCMD (Standard on HCSS & HCSD. Leave blank) (3.81) .150 Required for HCSS and HCSD. 02 T (Not available on HCMS or HCMD, = (5.84 mm) .230 tail = Tin unless Transfer, then only the HCMS/HCMD only (Standard on HCMS & HCMD. Leave blank) socket is polarized.) P XX S XX ST X R = Position Polarization = Daisy Chain Single = Stripped & Tinned = Reversed (50.80) Specify Suffix from table. All 2.00 1 XX / (3.18) 1 8 dimensions are / (1.59 mm). Not min. 16 available in 28 positions and higher. Single Row Connectors 01 02 01 02 Outer Most 03 04 03 (End of 04 Assembly) (101.60) 4.00 minimum 7 1 When mating double row connector ST8 /8 (3.18) with two single row connectors, the 1 Single ST4 /4 (6.35) Double M outer most single will be connected 1 ST2 /2 (12.70) = Middle Reversed to Conductor 1 and the inside single 3 ST3 /8 (9.53) to Conductor 2. 6 Specify XX as position. For Double 3 the same position will be polarized D XX on both ends. (Not available on = Daisy Chain, Double HCM, unless Transfer, then only the B XX socket is polarized) = Breakout (50.80) 2.00 1 XX / (3.18) 8 min. Specify XX as number of Double Row Requires SXX, WXX or DXX conductors to be broken out. Strips 7 Outer Most (End of 1 Assembly) XX O = Outside Reversed (101.60) (127.00) 4.00 minimum G 6 5.00 max. Breakout starts with Number 1 = Gray Cable (50.80) lead indicated by brown wire or 2.00 min. red stripe. Shown on top side. 4 W XX = Wiring Reversed Daisy Chain, Single RW = Reversed Wiring Standard cable is color coded. Specify G for Gray cable with one red edge. Same as S XX except outer strip connected to conductor 2 and inside Requires SXX, WXX or DXX strip connected to conductor 1. 1 wire opposite position 1 2 5 7 6 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.